Logic-Sunrise : actualités, téléchargements, releases, dossiers et tutoriaux
[PS5] PS5 App Dumper 1.0 disponibleThis CFW was tested on most PS3 Models by different testers and no problems were encountered.
But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.
Rogero CFW4.50 v1.01
•Added the ToolBox to [app_home/PS3_GAME] to restore multiMAN/StealthMAN launch mode from ToolBox.
•Added XMB InGame ScreenShot Feature.
•ReactPSN patch to work offline without the need to log into PSN at all.
•Cinavia Disabled for HDD content only using the DEX files.
•noBD/noBT patches to allow installation on consoles with broken BluRay Drive or Bluetooth board.
•This CFW can be installed fine from XMB Update over OFW3.55 or any CFW ver <= 3.41/3.55/4.21/4.30/4.40/4.41/4.46/4.50
•HDD can be swapped/changed and the CFW will re-install without any problem.
•Patched LV1 to disable LV2 Protection.
•Patched LV1 to add peek/poke support.
•Patched LV1 Core OS Hash Check (to prevent Bricking on non-dehashed downgraded consoles)
•Patched LV2 to add peek/poke support.
•QA Flag enabled by default to allow for easier downgrading using Recovery Menu.
•RSOD screen bypass patch for RSOD machines (it won't fix the RSOD but allows the PS3 to boot fine into XMB)
•PSN/SEN access is available but it's not recommended.
•It can run games signed with Keys up to version 4.50 without any Eboot/Sprx patching needed.
•The CFW can be used for Downgrading with Hardware flashers with PS3 Flash Auto Patcher v4.46a
* For help Downgrading from OFW4.50 (with Flasher) Please refer to this thread :
http://www.tortuga-c...&p=22170#p22170
* For help Downgrading back to CFW3.55 from any CFW Please refer to this thread :
http://www.tortuga-c...hp?f=127&t=4717
SingStar Icon Replacement:
http://tortuga-cove....340ed4d35fcc4fe
multiMAN ver 04.50.02 BASE (older multiMAN versions won't work on CFW4.50)
http://tortuga-cove....340ed4d35fcc4fe
ATTENTION:
1.This CFW does have LV1 checks disabled and can be installed on Downgraded PS3 consoles even if not dehashed after downgrade. Just in case anyone still need to dehash, here's the link Link ----> http://www.tortuga-c...hp?f=127&t=3638
2.Always make a NOR/Nand dump using multiMAN before installing any CFW to have a recovery backup in case of any bricks.
Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a chance to recover when you have a valid dump.
** A Hardware Flasher alone without a valid dump may not fix your bricked PS3 **
3.Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks.
4.DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First.
5.You need to be already on a 3.55OFW or 3.55/4.21/4.30/4.40/4.50 CFW to install this. Installing from any OFW > 3.55 won't work. (Hardware Flasher needed)
The much anticipated 1.6 firmware update is now available for download.
The biggest feature of this update is the addition of the new auto-eject feature. You can now switch games without rebooting and without ejecting discs. All from the comfort of your couch. The new auto-eject feature does not require any modifications to the ODE, nor does it require any new accessories or soldering, it is now available to all ODE users, from all models, with the simple update of your Cobra ODE.
We have also added periodical polling of the HDD to prevent hard drives from going to sleep mode which made some games freeze if they had been paused for a while. The HDD polling can be disabled or configured from the cobra.cfg file.
When Cobra ODE was first released, we had seen a huge amount of positive feedback, although many users had two major concerns, the first being the use of homebrew to achieve game selection, and the second being the need to reboot or eject discs in order to switch games. With the Cobra ODE browser support which was added in v1.5 and the auto-eject feature added in v1.6, we have resolved both of these concerns for our users. Today, the Cobra ODE looks like a brand new device with a completely new user experience, which we think will make most of you happy.
The Cobra Team is the first to bring true "no eject, no reboot" feature to the PS3 ODE world for all models and we will continue to bring you new exciting features in the future.You can now grab the 1.6 update form the downloads section. Please refer to the user manual for updated instructions on how to use the auto-eject feature.
We are also releasing an update to ps3genextra tool which generated the Cobra ODE Browser, please use this version with the 1.6 update.
Concurrently, we are releasing an update to the Cobra ODE Manager which adds support for the auto-eject feature and in parallel releasing an update to the third party integration library which allows third party managers to use the auto-eject feature.
Enjoy
- auto-eject for all consoles to switch games
- periodic polling of the HDD to prevent it going idle
- new option to enable auto-eject on game selection
- new option to configure HDD polling
- new /dev_bdvd/COBRA/EJECT file to allow managers to request auto-eject
- Correction d'un bug lors de la création du fichier IRD depuis un disque
- Correction d'un bug faisant crasher l'application lors du visionnage des fichiers IRD
- Ajout de la possibilité de sélectionner un HDD sur le réseau avec IsoMenuCreator
Les développeurs nous annoncent aussi qu'ils vont se pencher sur un autre bug qui consomme beaucoup trop de ressources et fait même parfois planter l'ordinateur lors de l'utilisation d'IsoMenuCreator.
UPDATE 2:
v1.02:
- added 4.50 certs to improve on spoof
- Sing Star app removal (let me know if works, as I never had app)
UPDATE:
v1.01: Added support REBUG 4.46.1 LITE EDITION
- Spoof 4.50 (PSN access)
- enabled Screenshots (thanks Mysis)
- Cinavia patched (including BD patch by HABIB)
- renamed Playstation Network to PSN (XMB and *Package Manager) as per $0nY
- renamed Hard Disk (*Package Manager) to System Storage as per $0nY
Hey y'all REBUG 4.46.1 REX users I thought I'd put together all of the recent updater like files that I've found or created.
I used the installer that we (Team XMBM+) created for XMB Manager Plus.
Updates consist of:
- spoof to 4.50 in all modes but 'Normal'
- Screen Shots in all modes
- BD Cinavia patch by HABIB
- renamed Playstation Network to PSN (XMB and *Package Manager) as per $0nY
- renamed Hard Disk (*Package Manager) to System Storage as per $0nY
Après avoir été assaillie de questions en tous genres par les utilisateurs, la team Gateway émet sur son blog une FAQ pour répondre aux plus communes de ces questions :
- Are you working on multirom support? Yes, we are working on multirom support. We hope to have it ready for the 2.0 release.
- Are you working on nand savegame support for pokemon/animal crossing? Yes, we will have pokemon and animal crossing working for the 2.0 release, we will not stop until we have this working!
- What can I do with emunand? It will emulate the system's storage and redirect it to SD, which allows you to update the "emulated NAND" to latest firmware while still keeping your system's physical NAND storage to 4.5. This means you won't need to miss out on fun things like eShop and more.
- Will you support retail gamecards? Yes, we will add an option to launch the original firmware (with emunand support) so you can play retail gamecards.
- Will you support saving without needing to close the application? Yes, we are working on directly updating the savegame file on SD when the savegame chip is being updated. We hope to have it ready for the 2.0 release.
- Are you working on supporting online play? We will start working on this after the 2.0 release.
- Are you working on supporting 5.x and 6.x 3DS systems? Yes, we have still not given up hope to support these consoles. But please be patient.
Une fois traduit, cela nous donne ceci :
- Travaillez-vous sur le support de plusieurs ROM ? Oui, nous travaillons actuellement sur cette fonction. Nous espérons qu'elle sera prête pour la publication de la version 2.0.
- Travaillez-vous sur le support des sauvegardes NAND pour pokemon/animal crossing ? Oui, le support de pokemon et animal crossing sera présent dans la 2.0, nous ne nous arrêterons pas tant que tout cela ne fonctionnera pas.
- Que puis-je faire avec l'EmuNand ? Cette fonction émulera le stockage du système pour le rediriger vers la carte SD de la 3DS. Cela permettra de mettre à jour la NAND émulée sur SD sur les derniers firmwares de Nintendo, tout en conservant la NAND originale en 4.5, permettant ainsi l'accès à l'e-shop et aux jeux en ligne avec vos jeux officiels.
- Pourra-t-on lancer des jeux originaux en mode Gateway ? Oui, nous ajouterons une option pour lancer le firmware original (avec le support de l'emunand) pour jouer à des jeux originaux.
- Sera-t-il possible de sauvegarder sans quitter l'application ? Oui, nous travaillons sur une fonction permettant de mettre directement à jour les sauvegardes sur la SD quand le jeu sauvegarde. Nous espérons que cette fonction sera prête pour la 2.0.
- Le Gateway supportera-t-il le jeu en ligne ? Nous commencerons à travailler sur une telle fonction après la publication du firmware 2.0
- Travaillez-vous sur un support des firmwares 5.x et 6.x ? Oui, nous n'avons toujours pas abandonné cette idée. Nous espérons que c'est possible, mais il faudra être patient.
La team Gateway ne faillit pas à sa réputation et semble déterminée à nous fournir ce qu'il peut se faire de mieux pour lancer des backups sur la 3DS.
Lost Eden, un jeux de fantasy développé par le studio Cryo Interactive et publié par Virgin Games en 1995. Il se déroule dans un univers où les humains cohabitent avec des dinosaures dotés d'intelligence, et relate la quête d'un prince qui tente d'unir humains et dinosaures contre les tyranosaures qui envahissent le continent.
Warcraft II: Tides of Darkness est unjeu de stratégie en temps réel (STR) développé par Blizzard Entertainment (y a t il besoin de le présenter ^^)
Little Big Adventure (alias Twinsen's Adventure et Relentless) est un jeu d'action-aventure réalisé par Adeline Software International en 1994
Le joueur incarne Twinsen, qui vit avec sa fiancée Zoé sur l'Île de la Citadelle. Twinsen fait depuis peu des rêves étranges, mais le régime dictatorial en place a prohibé toutes les références à une ancienne légende. Son récit les gêne, et ils l'enferment de force dans un asile pour le faire taire. S'évadant, il découvrira qu'il est annoncé par une prophétie pour sauver le monde.
- Appuyez sur L3 pour faire apparaître le clavier virtuel
- F1>>>L1
- F2>>>L2
- F3>>>R1
- F4>>>R2
- Espace>>> O
- Enter>>>Start
- Esc>>>Select
- Pavé directionnel>>>Croix de direction
Reactpsn activate.
Screenshots anywhere = active.
Core 3.3.0 con System Manager ported to 4.50
bd check “not active” ( in the next core flag bdemu will be available. )
wifi / bt check not-active ( Now you can update with this CFW if you have wifi or broken br )
This time i fetch the one i liked most of this *waves* of CFW’s and added mine.
To install SM.SELF you need to put it over your flashdrive root (fat32) and insert the flashdrive to the USB closer to the BR drive. Just switch on the PS3 and done. (HS9 note = I don’t know if something will popup thus i didn’t test this myself so MLT says that will get installed once you done this.)
For the nosearch FLAG it’s the same procedure like older cfw’s. nordump flags, flashdump, fullramdump, lv1dump, etc. All ported to 4.50 except BDEMU ( Coming soon, tomorrow).
You could use this thread as reference to better understanding over my old post.
hilo_update4-cfw-4-40-miralatijera-system-manager-1-1-amp-core-3-2-0-integrado-qaflag_1880798
(HS9 note = It’s in spanish so you could use google translate or ask me to translate that thread too.)
Just guess what goes first…
co.nz/#!bQ11HBhZ!buMLkWjVN8j6f6veXee-MUx7jY5IrGfN2Ppa3kJ2J_E
(HS9 note = It’s a joke.)
edit :
mini manual :
- Install PUP file, from XMB or recovery.
- Format flashdrive to FAT32 and copy into the root of the FD (flashdrive) SM.SELF file (50KB)
- Power on your PS3 with flahdrive inserted to the closest USB port of BR-drive.
- If all went well or OK, this will create a file called _Init.txt saying = “SUCESS!”. SM.SELF gets deleted in this process.
- If you don’t want to wait for more news ( emulator for BR for example) you can activate “flag no search” to increase speed in your PS3 boot-time. Just create a folder called “flags” over the root in your flashdrive and insert (copy) inside there a file of “0kb” named = nosearch
- Same procedure, power on your PS3 with the flashdrive connected to the USB closest to the PS3 BR-drive and if all goes well. Boot-time speed will increase and you can enjoy from this CFW.
Thanks to alexjrocks
UPDATE 1
CORE 3.3.1
flag bdemu operating (working).
Now you can install 4.50 without the controller, the PUP got fixed in order to “evade” BR-drive checks doing that to avoid also getting stuck in a loop. (pain in the arse). To use BDEMU, you must use this core, if not you can keep what you already have.
To install it just drag “sys_init_osd.self* into your flashdrive root (FAT 32) in the right USB port and power on your PS3.
To use BDEMU, you could use installdbemu. If you use instead nosearch at the same time or flag bdemu to left it active everytime you start your PS3 (boot-time) if you don’t want to use “nosearch”.
*lv1 peek / poke
*lv2 peek / poke
*Patched Syscon hash
*Patched nas_plugin ( PKG Install )
*Patched explore_plugin( original Install Packages )
*appldr , lv2 hash
*appldr, ecdsa
*isoldr, ecdsa
*spu_pkg_rvk_verifier , ecdsa
*spu_token_processor , ecdsa
*reactPSN activated
*Ingame screenshot function
*Core 3.3.0 compatible
*Patch no-bd activated
*Patch broken wifi/bd check activated
*Integrated Core 3.3.1 (Install the nosearch flag for the controller synchronization problem /dev_usb000/flags/nosearch)
*BDEMU flag compatible
On l'attendais tous et le voilà ! Le CFW de Rogero 4.50 vient de sortir mais cela ne sera sûrement pas la version finale. En effet, comme le dit le commentaire de Rogero, le CFW a été fait rapidement et la toolbox n'est pas encore compatible. Nous vous conseillons d'attendre les prochaines versions qui ne devraient pas tarder. Pour les fans et les accros, donnez-nous des retours !
Ne laissez pas de disque dans la console lors de la mise à jour. Pour cause, la PS3 va d'abord chercher la mise à jour sur le disque.
The CFW is packed manually with minimal modifications of the OFW4.50 and only the needed PKGs were repacked with their matching headers, lv0 and the SPU loaders also properly packed with correct sections/compression.
It does have all the basic patches from CFW4.46, the ToolBox was not added.
I built this last night before I go to sleep and installed it and tested it for 5 minutes only on my PS3, all seems fine and stable, but as usual with any CFW : USe it at your own Risk.
MD5 : 152db658f8806b42f224d06ae0bbd91b
Taille : 194 Mo (203,768,176 octets).
Rogero nous livre aussi une mise à jour pour les outils de downgrade avec flasheur en OFW 4.50 :
PS3 Flash Tool v4.50.rar : http://www.logic-sun...ps3-flash-tool/Télécharger CFW Rogero 4.50 CEX v1.0
v1.51, 14/10/13
Problem fixed:
- Fixed a small bug in the functions “Restore original console id (EID5)”
v1.50, 13/10/13
New Features:
- Added payload 4.50 DEX.
- “Control fan” now also supports CFW 4.50 DEX.
- Possibility to make “permanent” the console id inserted by keyboard on screen (ONLY FOR CFW 4.50 DEX). NOTE: the console id will be set automatically when you boot the console, is not necessary start ps3ita manager after every boot (ONLY FOR CFW 4.50 DEX).
- Small adjustments to the values of fan speed.
- Uses Retroarch's Tyrquake core.
- Auto-boots from XMB (RetroXMB)
- Added new background image and icon.
- A more visable red crosshair.
- a 3 pass curved tv boarder shader setup. (reduce to two passes if you want fullscreen)
- In game music
RazorX est un développeur actif sur la scène PS3 en ce moment. Il nous a livré plusieurs CFW mais aujourd'hui il revient vers nous pour autre chose. Il vient de mettre au point un homebrew qui va nous permettre d'activer ou de désactiver les protections Cinavia sur nos consoles PS3. La grande nouveauté est la compatibilité avec les nouveaux CFW 4.46 et 4.50.
Changelog :
Update:
Updated App To Remove & Restore Cinavia From BD's On 4.46 & 4.50 (Thanks to HABIB)
Lien temporaire avant l'upload sur LS : http://www.sendspace.com/file/jzwstg
User, développeur connu pour son outil PSNope, vient de libérer suite à la récente release de la team Cobra ce outil merveilleux intitulé VSH PRX Loader. Vous vous demandez à quoi cela sert ? C'est tout simple cet outil permet de faire tourner en arrière-plan des applications ou autres pendant que votre console est occupée à faire autre chose et tout cela sans entraîner de bug ou ralentissement. Vous pourrez par exemple jouer à votre jeu favori tout en transférant par FTP en arrière-plan et tout sera fluide. Les plugins vont commencer à pleuvoir du ciel et deank a été le premier sur le coup. De grande choses vont arriver grâce à ce soft alors surveillez-le de près.
Changelog et historique :
Features:
run tasks in the background tasks are running all the time (vsh, ingame, etc.) Features of Sample Plugin: remote peek/poke at any time full ram access via lv1 peek/poke Requirements: 4.46 Firmware Cex or Dex with LV2 Syscall 10 (e.g. Rebug) 4.50 Firmware with LV2 Syscall 10 (untested, dunno if it exists at all) how to:
Lien temporaire avant l'upload sur LS : http://www.sendspace.com/file/43fx2b