Logic-Sunrise : actualités, téléchargements, releases, dossiers et tutoriaux

Alors que nous vous annoncions que la Team Gitbrew arrêtait ses projets jusqu'a nouvel ordre, et bien aujourd'hui, nous apprenons une autre mauvaise nouvelle... En effet, Dospiedras, auteur des applications et de la méthode pour downgrader les Playstation 3 équipées du Firmware 3.70, nous annonce que les consoles portant le numéro de série suivant : CECH-2504 sont impossible à downgrader à l'heure actuelle du fait d'un nouveau METLDR. 

Citation de l'auteur :

for that guys, I found a console factory cech2504 with fw 3.60 and I found this: 00 00 00 01 00 00 00 01 00 00 00 00 00 02 E8 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 F9 65 74 6D 20 6C 64 72 2E 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

texto en:
you ……..@…… ù metldr.2 ………….. …………. ………..

the console in question was a cech2504 with 1B Datecode
guess that’s where all have that forward and not Datecode downgrade for now [poraki]

lukin through the notice and the toil of extracting the rules and be 6 hours trying the downgrade in different ways [Buuuaaaa]

ModMii, anciennement NUS Auto Downloader, est un programme Windows créé par le développeur anglais X-Flak. ModMii permet de télécharger des IOS, cIOS, thèmes pour votre Wii et encore plein d'autres choses. Mais ce n'est pas tout, ModMii permet aussi de générer tous les fichiers nécessaires pour effectuer un hack de votre Wii grâce à une série de questions. Cette version de ModMii est en anglais.

Changelog :

- Stopped converting ModMii.bat into an executable, this should prevent false-positive virus detections.

- Changed ModMii's folder structure; everything is now organized in a "Support" folder. Additionally, ModMii's NAND builder now loads wads from "temp\wad" instead of "temp\install2sneek".

- Added an option to build SNEEK and SNEEK+DI with SD access enabled. The default setting is disabled.

- ModMii now uses writecdb.exe by scooby74029 to construct cdb.vff when building emulated NANDs. This reduces the amount of time it takes to boot an emulated NAND for the first time.

- Added support to save\load multiple download queues.

- Added support for the DarkWii Blue and DarkWii Orange System Menu themes.

- Updated the "create custom.md5" feature in ModMii's Options page. Now all files are checksummed instead of just wad\dol\elf\app files. Custom.md5's are also updated with the current "Drive" setting. This is great for advanced users to debug things. For example, DeadlyFoez can now create a custom.md5 using "Copy_to_SD" as his "Drive" setting, then share it with Violator who has "C:" as his "Drive" setting. This will allow Violator to verify he has the exact same set of files as DeadlyFoez.

- Instead of bundling Unfreezemii.bat with ModMii, users are instructed to type "Ctrl+C" then "N" then "Enter" when they encounter long periods of inactivity.

- Fixed bug where URL Forwarders were not using the first 4 characters of the URL (ie. "www.hotmail.com" would load "hotmail.com").

- Fixed bug where System Menu themes were not being installed to emulated NANDs.

- Fixed bug causing the Dop-Mii download to fail.

- Code clean-up and other minor changes.

- ModMii, now popping more cherries than Hugh Hefner.

**MAJ19/09/2011** : par seb57fr

Changelog : ModMii V4.7.2

- Added Command Line Support to ModMii. Now you can send arguments to ModMii via

a cmd window (or batch file) to perform a wide variety of functions. For information on using ModMii via cmd line, open a command window where ModMii is saved and type "ModMii Help"; alternatively, you can save that text in a new text document where ModMii is saved (rename it from .txt to .bat) then run it.

- When building an emulated NAND if a file is missing or invalid it will now be reported on the final summary page.

- Entering nothing on the Download Log page no longer sends non-donators to the credits page again.

- Update to ModMii Shortcute-er (by person66) to always run ModMii using cmd.exe even if a different file association is set.

- Fixed bug when extracting the full version of configurable usb-loader where all the files in the usb-loader folder were not saved to the appropriate subfolders.

- Fixed inconsistencies with the recommended cIOS222; v4 is now recommended on all pages\guides.

- Fixed bug where orange themes were not being downloaded.

- Fixed bug where ModMii would crash when building s\uneek if the drive setting(s) contained brackets.

- ModMii; now writing it's own jokes.

- Other minor changes.

**MAJ01/10/2011** : par seb57fr

Changelog : ModMii V4.7.3

- Added a sysCheck Updater feature. You can supply ModMii with your unique sysCheck.csv log and ModMii will analyze it then notify you which specific softmods you're missing. It will download only the files required to update your softmod as well as build a custom guide for you to follow.

- Replaced sysCheckGX on Download Page 2 with sysCheck v2.1.0 b13.

- Added dip patch the IOS60's patches. The patched IOS60 is now installed to all system menu slots to protect against 003 bricks. As a result, the ModMii Wizard no longer needs to ask if the Wii has been region changed.

- Removed Extra Brick Protection option. Instead extra brick protection is now always installed. This includes installing a patched IOS60 to all system menu IOS slots as well as installing a USB-Loader Forwarder Channel. Also added an option to exclude the USB-Loader Forwarder Channel from the ModMii Wizard.

- Added feature to install a secondary custom folder of wads when building emulated NANDs.

- When building an emulated NAND ModMii no longer asks users to provide a serial number; instead the default serial number is always used. This change was implemented after discovering that using different serial numbers has no impact on functionality.

- Fixed bug where the Photo Channel was not being fully installed to emulated NANDs. Now the initial version of the Photo Channel as well as v1.1 are installed to emulated NANDs. The initial version of the Photo Channel was added to Download Page 1; however it shouldn't be required for anything other than emulated NANDs.

- Stopped using IOSkpatch to patch emulated NANDs as it is no longer necessary.

- ModMii: now updated more frequently than your wife's wardrobe.

- Other minor changes.

Zoontek, technicien expert et développeur à ses heures perdues, profite de la sortie de DosFlash 2.0 pour mettre à jour son utilitaire de création de clé USB bootables DOS, qui passe également en 2.0. Si vous faites partie de ceux qui jonglent avec les clés USB, et que refaire une clé USB bootable avant chaque flash vous agace, ce petit programme est susceptible de vous plaire.

Deux outils sont fournis avec : DosFlash 2.0 et L-O-Eras 1.0. Mais libre à vous d'en copier d'autres sur votre clé USB, par la suite (HDDhackr, par exemple).

Principaux changements:

[OneBoot 2.0]
- Nouvelle méthode de boot
- Nouveau Kernel, supposé plus tolérant
- Support complet des claviers Français
- Mise à jour de Syslinux (4.04)
- Mise à jour de DosFlash (2.0)

Le développeur Kai Schtrom nous livre aujourd'hui via le Xbins une nouvelle version de son application baptisée DosFlash et qui vous permettra de flasher vos lecteurs Xbox360 sous DOS. On remarquera principalement dans cette nouvelle version l'intégration des dernières méthodes d'unlock des lecteurs Slim avec chip Winbond/MXIC. L'auteur en profite d'ailleurs pour saluer le travail de Geremia et de la Team Maximus sur ces méthodes de déverrouillage.

Voici la liste des nombreuses modifications de cette version 2.0 :

DosFlash V2.0 Release Date 03.09.2011
---------------------------------------
- Key extraction task "LiteOn Key V3 (Tarablinda)" now supports the Slim firmware versions 9504, 0272, 0225, 0401, 1071 and also tries to discover the key on unknown firmware versions
- 2 new tasks added named "Lock SPI Flash" and "Unlock SPI Flash"
  The new unlock SPI flash task is used in combination with Geremia's MXIC and  Winbond Unlock method. 

  It is very much influenced by Geremia's unlockSPI program, which was the first bruter to unlock Winbond SPI flashes.

  To relock the flash after you have finished writing a patched firmware to it, use the lock SPI flash task.

  This will instantly make the SPI flash write protected for all blocks. BP0, BP1 and SRP status bits are activated afterward, so handle this function with care!
- Read Flash task now can create a full firmware dump of the Slim firmware versions 9504, 0272, 0225, 0401 and 1071

 To create full firmware dumps of 0225 drives and above you should get a compatible SATA2 controller and set it to IDE mode. In addition you should be able to do Geremia's MXIC or Winbond unlock method.  

 The compatible SATA2 controller is needed to unlock the MTK. Any installed drivers should be uninstalled, because they will switch the controller back to AHCI mode. In combination with the SPI flash status register unlock you are able to write to the firmware and inject Geremia's 8051 trojan, which can then dump the complete firmware. A risk level is added to show you how risky it is for your individual flash chip and firmware combination to write the patched firmware to obtain a full dump.
- Possibility during "Read Flash" task to write firmware sector 3E of Slim drives with unknown firmware version This feature should be useful if new, unknown Slim firmware versions get out. If you write the patched 3E sector to a new and unknown firmware version this could potentially kill your drive. So handle it with care!
- Portio.sys reimplemented as separate driver for DosFlash32 and DosFlash64
  The driver files portio32.sys and portio64.sys are again separated from the executable file. This way the
  user has the possibility to sign the drivers on his x64 system with the Driver Signature Enforcement  Overrider.
- SATA and IDE adapter list updated


Geremia's Tarablinda method on LiteOn PLDS DG-16D4S with other firmware than 9504 and DosFlash32/64
-----------------------------------------------------------------------------------------------------
- connect your Slim drive to a SATA2 controller set to IDE mode
- make sure the drivers for the SATA2 controller are uninstalled
- connect a separate power supply unit to the LiteOn PLDS DG-16D4S, don't turn it on yet
- power up PC and boot into Windows
- turn on the LiteOn psu
- run DosFlash32/64
- the drive and flash chip should identify properly
- choose the task "LiteOn Key V3 (Tarablinda)"
- press "LiteOn Key V3" button
- choose a destination directory for the extracted files
- after this DosFlash32/64 displays your DVD-Key and saves your key and identify data
- then DosFlash32/64 displays the following message:
  There seems to be a LiteOn Slim drive connected as Master
  to port 0xA000.
  You should try SATA2 MTK unlock method.
  - Use a compatible SATA2 controller set to IDE mode
  - Repower the drive which is connected to the SATA 2 controller
  - Press "Yes" if you are ready
  Are you ready?
- do the above and press "Yes"
- this repower is used to get DosFlash32/64 back to a known MTK state


Geremia's Tarablinda method on LiteOn PLDS DG-16D4S with other firmware than 9504 and DosFlash16
--------------------------------------------------------------------------------------------------
- connect your Slim drive to a SATA2 controller set to IDE mode
- connect a separate power supply unit to the LiteOn PLDS DG-16D4S, don't turn it on yet
- power up PC and boot into Ms-DOS 6.22
- turn on the LiteOn psu
- run DosFlash16 in auto mode
- the drive and flash chip should identify properly
- choose your drive number
- as task choose "LITEON K"
- as extraction method choose "V3"
- choose a destination directory for the extracted files
- after this DosFlash16 displays your DVD-Key and saves your key and identify data


Unlock flash on LiteOn PLDS DG-16D4S with other firmware than 9504 and DosFlash32/64
--------------------------------------------------------------------------------------
- connect your Slim drive to a SATA2 controller set to IDE mode
- make sure the drivers for the SATA2 controller are uninstalled
- connect a separate power supply unit to the LiteOn PLDS DG-16D4S, don't turn it on yet
- power up PC and boot into Windows
- turn on the LiteOn psu
- run DosFlash32/64
- the drive and flash chip should identify properly
- choose the task "Unlock SPI Flash"
- press "Unlock SPI Flash" button
- you will hear a test sound from the PC speaker and the following message is displayed:
  The sound that just played was a test. You will hear the
  same sound if unlocking is successful later on. If you
  have not heard a sound, you should skip the unlock and
  check your PC speaker.
  Unlocking the SPI flash requires you to use Geremia's MXIC
  or Winbond Unlock method. Proceed like follows:
  - Press "Yes" if you are ready
  - Start Geremia's MXIC / Winbond Unlock
  - Stop if you hear the sound
  Are you ready?
  (Press ESC key to abort!)
- press "Yes"
- start MXIC or Winbond dremel unlock
- stop if you hear the test sound again
- the SPI flash should now be successfully unlocked


Unlock flash on LiteOn PLDS DG-16D4S with other firmware than 9504 and DosFlash16
-----------------------------------------------------------------------------------
- connect your Slim drive to a SATA2 controller set to IDE mode
- connect a separate power supply unit to the LiteOn PLDS DG-16D4S, don't turn it on yet
- power up PC and boot into MS-DOS 6.22
- turn on the LiteOn psu
- run DosFlash16 in auto mode
- the drive and flash chip should identify properly
- choose your drive number
- as task choose "U" for "Unlock SPI Flash"
- you will hear a test sound from the PC speaker and the following message is displayed:
  The sound that just played was a test. You will hear the
  same sound if unlocking is successful later on. If you
  have not heard a sound, you should skip the unlock and
  check your PC speaker.
  Unlocking the SPI flash requires you to use Geremia's MXIC or Winbond Unlock
  method. Proceed like follows:
  - Press "Yes" if you are ready
  - Start Geremia's MXIC / Winbond Unlock
  - Stop if you hear the sound
  Are you ready?
  (Press ESC key to abort!)
- confirm with 'Y' for "Yes"
- start MXIC or Winbond dremel unlock
- stop if you hear the test sound again
- the SPI flash should now be successfully unlocked


Read flash on LiteOn PLDS DG-16D4S with other firmware than 9504 and DosFlash32/64
------------------------------------------------------------------------------------
- you should have unlocked the SPI flash prior to reading the flash, otherwise the following steps will not work
- connect your Slim drive to a SATA2 controller set to IDE mode
- make sure the drivers for the SATA2 controller are uninstalled
- connect a separate power supply unit to the LiteOn PLDS DG-16D4S, don't turn it on yet
- power up PC and boot into Windows
- turn on the LiteOn psu
- run DosFlash32/64
- the drive and flash chip should identify properly
- choose the task "Read Flash"
- press "Read Flash" button
- enter the name of your flash firmware output file e.g. fulldump.bin
- you read the following (the displayed checksum and risk level can vary):
  Risk Level: Minimal! Winbond SPI flash with empty 3D3E sectors.
  Firmware sectors 0x3D000 and 0x3E000 match known checksum
  0xFFFFF800.
  Do you want to write firmware with patched code to be able to read
  the firmware?
- press "Yes"
- then DosFlash32/64 displays the following message:
  There seems to be a LiteOn Slim drive connected as Master
  to port 0xA000.
  You should try SATA2 MTK unlock method.
  - Use a compatible SATA2 controller set to IDE mode
  - Repower the drive which is connected to the SATA 2 controller
  - Press "Yes" if you are ready
  Are you ready?
- do the above and press "Yes"
- after this DosFlash32/64 saves your firmware dump and displays the above message again, repower
  the drive again and press "OK"
- the last repower is used to get DosFlash32/64 back to a known MTK state


Read flash on LiteOn PLDS DG-16D4S with other firmware than 9504 and DosFlash16
---------------------------------------------------------------------------------
- you should have unlocked the SPI flash prior to reading the flash, otherwise the following steps will not work
- connect your Slim drive to a SATA2 controller set to IDE mode
- connect a separate power supply unit to the LiteOn PLDS DG-16D4S, don't turn it on yet
- power up PC and boot into MS-DOS 6.22
- turn on the LiteOn psu
- run DosFlash16 in auto mode
- the drive and flash chip should identify properly
- choose your drive number
- as task choose "R" for "Read Flash"
- enter the name of your flash firmware output file e.g. fulldump.bin
- you read the following (the displayed checksum and risk level can vary):
  Risk Level: Minimal! Winbond SPI flash with empty 3D3E sectors.
  Firmware sectors 0x3D000 and 0x3E000 match known checksum 0xFFFFF800.
  Do you want to write firmware with patched code to be able to read
  the firmware (Y/N)?
- confirm with 'Y' for "Yes" and press Enter
- then DosFlash16 displays the following message:
  There seems to be a LiteOn Slim drive connected as Master to port 0xA000.
  You should try SATA2 MTK unlock method.
  - Use a compatible SATA2 controller set to IDE mode
  - Repower the drive which is connected to the SATA 2 controller
  - Press "Yes" if you are ready
  Are you ready (Y/N)?
- do the above and press 'Y' for "Yes"
- after this DosFlash16 saves your firmware dump


Lock flash on LiteOn PLDS DG-16D4S with other firmware than 9504 and DosFlash32/64
------------------------------------------------------------------------------------
- connect your Slim drive to a SATA2 controller set to IDE mode
- make sure the drivers for the SATA2 controller are uninstalled
- connect a separate power supply unit to the LiteOn PLDS DG-16D4S, don't turn it on yet
- power up PC and boot into Windows
- turn on the LiteOn psu
- run DosFlash32/64
- the drive and flash chip should identify properly
- choose the task "Lock SPI Flash"
- press "Lock SPI Flash" button
- read the displayed warning carefully, because locking the flash is very risky
- press "Yes"
- the SPI flash should now be successfully locked


Lock flash on LiteOn PLDS DG-16D4S with other firmware than 9504 and DosFlash16
---------------------------------------------------------------------------------
- connect your Slim drive to a SATA2 controller set to IDE mode
- connect a separate power supply unit to the LiteOn PLDS DG-16D4S, don't turn it on yet
- power up PC and boot into MS-DOS 6.22
- turn on the LiteOn psu
- run DosFlash16 in auto mode
- the drive and flash chip should identify properly
- choose your drive number
- as task choose "L" for "Lock SPI Flash"
- read the displayed warning carefully, because locking the flash is very risky
- confirm with 'Y' for "Yes"
- the SPI flash should now be successfully locked


DosFlash16 Manual Mode Examples for LiteOn Slim 0225
------------------------------------------------------
- Extract drive key on a "PLDS DG-16D4S 0225"
  DOSFLASH LITEON K V3 1010 A0

- Unlock SPI Flash on a "PLDS DG-16D4S 0225"
  DOSFLASH U 1010 1 A0 3 0

- Read firmware on a "PLDS DG-16D4S 0225"
  DOSFLASH R 1010 1 A0 3 0 4 FWOUT.BIN 0

- Write firmware on a "PLDS DG-16D4S 0225"
  DOSFLASH W 1010 1 A0 3 0 4 FWIN.BIN 0

- Erase firmware on a "PLDS DG-16D4S 0225"
  DOSFLASH E 1010 1 A0 3 0 4 C7 0

- Lock SPI Flash on a "PLDS DG-16D4S 0225"
  DOSFLASH L 1010 1 A0 3 0


Excellent work on the MXIC / Winbond unlock by Geremia and Maximus.
As the Duke would say: Hail to the kings baby!
Kai Schtrom

C4eva, a annoncé via IRC, qu'un nouveau firmware allait voir le jour prochainement. Avec l'arrivée des nouveaux jeux sous format XGD3, il fallait bien que ça arrive !

Pour rappel, le XGD3 est une nouvelle protection se présentant sous la forme d'un nouveau format de gravure permettant d'ajouter jusqu'à 1go de données sur un disque double couche n'en disposant normalement que de 8.5 (go).

Le firmware 0800 est destiné aux lecteurs BenQ notamment et permet le dump complet des jeux originaux afin de créer un backup des derniers et donc par la suite de les graver.

Grâce à cette nouvelle version du 0800, il se peut donc que nous ayons prochainement la possibilité de jouer aux jeux tels que Driver San Francisco ou encore les futurs titres qui seront estampillés XGD3. Pour le moment, aucune nouvelle concernant le firmware LT+ 2.0 qui permettra de lire ces nouveaux jeux en format backup sur nos console n'a été donnée mais C4eva dit chercher un moyen pour graver le giga supplémentaire sur les deux galettes de nos bons vieux DVD de 8.5 go.

Néanmoins, il se peut, en théorie, que grâce à l'arrivée du 0800 XGD3, nous puissions tout de même profiter des jeux sous ce format si jamais nous disposons d'un système d'émulateur de DVD comme le x360 Key ou encore le BoxZii mais à ce jour, ce n'est qu'une théorie.

Maj 3 septembre 20h23 :

La Team Gitbrew vient d'annoncer que les recherches et les développements sur la Playstation 3 sont stoppés jusqu'à nouvel ordre.  La raison  : ils estiment que les recherches ont été suffisantes et que le projet Others OS ++ est maintenant terminé. A savoir qu'en se retirant, la Team GitBrew emporte avec elle les avancées sur les signatures des PKG 3.60... Triste nouvelle donc.

Citation de la Team :

One of the main goals of the Gitbrew project was to bring back what Sony has disrespectfully removed from the majority of PlayStation 3 owners,
OtherOS. We have successfully completed that goal with the release of OtherOS++ and since that time we have carried out a
great deal of research resulting in progress unheard of in the "PS3 Scene" since Sony's lawsuits against Graf and Geobot.

OtherOS++ Project is the culmination of work done by Glevand and Gitbrew, building on top of open source work released by Graf.
Linux/BSD has extensive capabilities in the field of research and development making it a powerful tool to peruse and employ the console to its full use.
Without Graf, we never would have completed this project. Here is to Graf, thank you for your courage in the fight for Linux.

---------------------------------------------------------------------------------------------------------------------------------------------------------

Gitbrew will suspend work for PS3 related projects until further notice. Individual developers working under Gitbrew will continue work as usual for whatever projects that may be in progress.
Gitbrew will continue to host our collection of mirrors, past and current projects as well as individual developer software. IRC server will stay active for otheros discussion and help (#otheros).
This does not mean all development has come to a halt; we have more releases planned for the future on other devices. We will also host an active community for homebrew developers of all systems.

Thanks to everyone in the scene that has contributed to our cause and special thanks to those who realize the information is out there waiting to be found. Our intention has been fulfilled.

Kakaroto n'avait plus fait parler de lui depuis déjà quelque temps mais il revient aujourd'hui sur le devant de la scène PS3 afin de nous présenter un outil de référence créé spécialement pour les développeurs d'homebrews sur PS3. Grâce à cet outil, les étapes de finalisation et de personnalisation seront bien plus aisées à faire. Il annonce également que d'autre outils apparaîtront au fil des prochains jours.

Voici une démonstration vidéo montrant une interfce utilisateur pouvant être créée (sous forme de POC pour openmoko) :

Depuis quelques temps, l'espoir revit sur la scène PS3 avec l'apparition de nombreux programmateurs très utiles. Progskeet et Tensy++, entre autres, ont permis le downgrade du FW 3.70 vers 3.55 (hackable) ainsi que l'E3 Flasher promettant non seulement un downgrade automatisé sans soudure sur PS3 mais aussi le dualboot CFW/OFW extrêmement attendu par toute la communauté. Mais comme il y a toujours une mauvaise nouvelle, il semblerait que les nouveaux modèles de PS3 ne permettent pas ces exploits. En effet, d'après le célèbre hackeur Dospiedras (le premier à avoir dévoilé une méthode de downgrade 3.70), sa console dont la référence est CECH2504 ne peut être downgradée selon lui, à cause d'une nouvelle révision du METLDR

00 00 00 01 00 00 00 01 00 00 00 00 00 02 E8 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 F9 20 6D 65 74 6C 64 72 2E 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Si cette information s'avère véridique, ce sera clairement un nouveau challenge pour la scène PS3, agonisante en ce moment.

The Z, modérateur de PSPKing et développeurs PSP très actif, nous propose aujourd'hui un nouvel Homebrew : Lightspeed. Lightspeed permet au possesseur de PSP en Light Custom Firmware 6.60ME d'installer une nouvelle icône sur le XMB permettant de redémarrer en un instant le LCFW 6.60ME. Grâce à ceci, plus besoin du « LME Launcher » sur votre PSP.

Installation :

- Télécharger LightSpeed

- Copiez le dossier PSP à la racine de votre PSP

- Lancez LightSpeed depuis le menu Jeu du XMB

- Appuyez sur :

* X pour installer LightSpeed dans le menu Digital Comics du XMB

* [ ] pour installer LightSpeed dans le menu SensMe du XMB

- La PSP installe les fichiers, la PSP retourne au XMB

- Allez dans le menu SensMe/Digital Comics et admirez

**MAJ16/09/2011** : par Yoann-95

Changelog : LightSpeed V1.4

- Support de la version 6.60ME1.4 de Neur0n

Alors que le Xkey ainsi que le Boxzii ont donné tous les deux récemment des nouvelles, il fallait bien que la Team Wasabi réagisse. C'est aujourd'hui chose faite, la Team annonce que le Wasabi X360S sera disponible chez les revendeurs dès la semaine prochaine. Attention, ceci ne concerne que le modèle Slim. Pour le modèle Fat, la team annonce la disponibilité quelques jours plus tard seulement. En attendant l'arrivée du produit chez les revendeurs, vous pouvez toujours précommander le Wasabi X360S sur le LS Store.

C'est aujourd'hui que nous apprenons la sortie d'un nouveau plugin du nom de Savedata Mgr 1.2 Alpha. Savedata est un plugin pour le moins intéressant car il permet de gérer ses sauvegardes. Celui-ci a été créé par SnyFbSx qui est d’ailleurs l'auteur de Psp Power Controller.

Méthode d'installation :

- Extraire l'archive à la racine de la carte mémoire

- Rajouter la ligne suivante dans le fichier vsh.txt  et game.txt pour les psp 1000,2000,3000 : ms0:/seplugins/SaveDataMgr.prx 1

- Rajouter la ligne suivante dans le fichier vsh.txt et game.txt pour les PspGo : ef0/seplugins/SaveDataMgr.prx 1

Pour activer le plugin, il faut redémarrer la PSP et appuyer sur la touche écran.

Changelog :

v1.2 · icon view, optimization of memory-related internal memory go, implement the switching of the M2
v0.6 · ini settings related to the implementation
v0.5 · BACKUP, DELETE implementation of internal processes around
v0.4 · BACKUP, DELETE implementation around the foundation treatment
Reload v0.2 · Add Action menu, change the drawing mode main menu, sub menu position review
modification of the circulation system moves the cursor
v0.1 · estuibal, get the support of the painting by Mr. hiroi01

La team derrière le Cobra USB (dongle permettant notamment de lancer des jeux PS1) nous propose une nouvelle mise à jour du firmware et du gestionnaire USB. Ceux-ci passent en version 3.1. Au menu, on ne retrouve pas de réelles nouveautés mais juste de petites corrections ou ajouts. 

Pour l'utiliser, vous devez être en 3.41 ou en CFW 3.55 spécial Cobra.

Changelog :

- Correction de problèmes de stabilité. Les utilisateurs du Cobra USB sont invités à mettre à jour vers ce firmware dès que possible.

- Correction du problème de compatibilité avec Mortal Kombat.

- Correction des problèmes PAL/NTSC dans les jeux PSX.

- Correction : quelques rares titres spécifiques PSX tels que Langrisser Final Edition ne pouvaient pas être lancés depuis d'autres régions.

- Correction d'un bug possible discless dans de très rares circonstances.

- Le Cobra USB Manager peut maintenant prendre en compte la convention de nom ".001, .002, ..." utilisée par HJSplit et d'autres programmes similaires et les renommer automatiquement vers la convention de nom "0.0, 0.1". Les utilisateurs peuvent utiliser HJSplit ou tout autre outil similaire pour diviser les fichiers ISO dans le PC.

- Ajout de fonctionnalités au noyau pour mettre en œuvre un Cobra Firmware Updater dans la PS3.

Plus d'informations sur le site officiel de Cobra.