iPrep 101 disponible en téléchargement

Klutsh release une version beta de son soft iprep 101 version 008.5 beta, une application qui necessitera .NET pour fonctionner. Cette appli qui tourne sous windows vous aidera à préparer une clé USB pour booter dessus en dos et flasher de cette manière vos lecteurs Samsung, BenQ et Lite-On.

Nfo d'origine :

------------------------------------------------------
RHPG's iPrep

Version: 010
--------------
Released: 17/08/2009 (UK DATE)
--------------
Programmer: Klutsh
--------------
License: GNU GENERAL PUBLIC LICENSE
--------------
Copyright Notes:

This software may be freely redistributed so long as it is left unaltered.

------------------------------------------------------

*DISCLAIMER: ANY USE OF THIS PROGRAM IS YOUR OWN RISK*
None of the contributing programmers shall be held responsible for any
damages that may be caused by the use of iPrep and accompanying files.


About iPrep:
----------
iPrep is a .NET application and collection of applications
for use in flashing Samsung, BenQ or Lite-On DVD drives.

- Floppy/USB drive Bootable Format.
- MD5 check, lets you know your firmware is legit.
- Updateable Firmware definitions.
- Works iXtreme 1.5, 1.6 and future firmwares.
- Loads Firmware from .bin or .rar.

------------------------------------------------------

Whats New:
----------
- liteTool (Lite-On 83850C Support).
- Updated DosFlash to 1.8.
- Revised DOS based guide.
- Removed FAT32 Option.

------------------------------------------------------

!!NOTE:
BE CAREFUL! THIS PROGRAM USES A FORMAT COMMAND. THIS CAN AND WILL DELETE ALL FILES
ON THE REMOVEABLE DRIVE YOU CHOOSE. IF THERE ARE FILES ON YOUR FLOPPY OR USB
DRIVE YOU WANT TO KEEP, GET THEM OFF THE MEDIA FIRST! THE FILES WILL BE DELETED.
DOUBLE-CHECK YOUR DRIVE LETTER BEFORE RUNNNING THE PROGRAM.
NOBODY WANTS TO ACCIDENTALLY FORMAT THEIR WORK!
A CHECK HAS BEEN INPLEMENTED TO PREVENT HDD ERASURE BUT I CANNOT GUARANTEE IT.

Thanks to:
-------
In no particular order.
coFree, Caster420, Geremia, c4eva, Kai Schtrom, Bart and Hewlett-Packard.
Thanks also to those that are not mentioned but who contributed to make this all possible.

Requirements:
-------------
Microsoft .NET Framework V2
Serial ATA Drivers installed in Windows for the SATA Detection.