- align patch slots properly on glitch images
- add ability to make zero-paired dual cb images (retail/glitch)
- unknown devkit smcs were not being checked properly and always reported hacked
- added support for ‘blmod.bin’ per-build file, can assist fine tuning glitch machines that don’t play well with standard patches
- added CPU key corruption checks
- added a secondary check on nanddump.bin size after determining big block/small block
- added new build target, glitch2m, which uses mfg cba to boot with virtual fuses (only trinity/corona, 16203+)
- added nolan addon patch for 16197+ for those with bad wired lan phy getting E75/76/77; should not affect wireless dongles
- consolidate internal memory unit disable patches into nointmu addon, Corona 4G internal memory can now be disabled (16197+)
- added integrity checks for: blocks that appear to be remapped but are outside the remap area; CF slot size
- updated all patch sets to use hv built in memcpy (better peek support for things that require 64bit reads like 1bl ROM)
- check for SU container in version\$SystemUpdate subfolder as well as version folder
- nonces will attempt to be kept when providing NANDdump.bin (some claim this affects glitch boot times, makes differential flashing more effective)
- Xstress.settings has been renamed to Manufacturing.data
- update jtag freeboot core to V0.9 to use options stored in flash header instead of patched directly into the binary
- added update and client mode
- -d options no longer need to be relative to the exe launch path
- checks keyvault signature (if present) when MAST_pub.bin is available from update server or file in .\ or .\common\
- checks CB/CBA signature when 1BL_pub.bin is available from update server or file in .\ or .\common\
- updated xell builds to XeLL_Reloaded-2stages-v0.993
- add 16537
xeBuild 1.08 : support du kernel 16537
Posté 31 août 2013 - 23:32
#1
Posté 31 août 2013 - 23:35
#2
Console : Xbox 360 Elite (Jasper) RGH, New 3DS XL Fire Emblem Fates Edition Boot9strap/Luma3ds, Nintendo Switch SX Pro.
Posté 31 août 2013 - 23:55
#4
Installation RGH, JTAG, XKey dans le 90,25 ,70
Envoi postale possible
Tel 06-49-54-96-76
Posté 01 septembre 2013 - 00:54
#5
Modification/Réparation dans le 59
[Softmod Xbox] [Hack Jtag/Puce Glitch/Xkey Xbox 360]
[Puce PS1][Softmod PS2] [Jailbreak/CFW/ODE PS3]
[Sofmod Wii/Wii U] [Config Retrogaming PC/Raspberry]
~
Posté 01 septembre 2013 - 05:49
#8
Posté 01 septembre 2013 - 06:42
#9
Posté 01 septembre 2013 - 06:59
#10
Modbox
Posté 01 septembre 2013 - 08:21
#11
XBOX 360 : Flash LT+ 3.0, Pose de Xkey,HACK JTAG/GLITCH
PSP : Installation Custom Firmware suivant version de PSP
WII : Pose de puce, Installation SOFTMOD (FW 4.3 INCLUS) USBLOADER + HBC
PS3 : Downgrade Installation Custom FW, COBRA, 3KEY
Région 57 Saint Avold - Contact - 06.29.49.05.21
Posté 01 septembre 2013 - 08:50
#12
Posté 01 septembre 2013 - 11:37
#13
ôô
Posté 01 septembre 2013 - 12:29
#14
Ne rêves pas ta vie, vies tes rêves ![]()
Posté 01 septembre 2013 - 20:55
#16
Posté 03 septembre 2013 - 08:27
#17
Modification Xbox 360 et Wii sur Bordeaux, en plein centre ville.
Travail réalisé sous vos yeux, répond à toutes vos questions.
Xbox 360 : Flash tous lecteurs, Xkey, Glich, Réparations : mon annonce ici
Wii : Hack software : mon annonce ici
1 utilisateur(s) li(sen)t ce sujet
0 invité(s) et 1 utilisateur(s) anonyme(s)















