La team nous informe que la difficulté d'installation du SPI sera sensiblement la même que sur les anciennes cartes mères, différents choix s'offriront à nous pour l'installer :
- Par des QSB (Quick Solder Board)
- Avec des fils (sûrement la meilleure solution)
Voici le communiqué de la team :
A new Nand reader/writer had to be developed to interface to the 4GB Corona motherboard due to the new phison chip and the differences in the communication protocol.
Installation difficulty is about the same as the old Nand SPI reader (even though the pads are slightly closer together, installers will have the choice to use a quick solder board or directly solder wires to the motherboard).
One small note regarding nand dumps : V2 nand dumps don't have ECC bytes (this is by design, since they are stripped by the phison controller which also takes care of blocks remapping and a bunch of other stuff), so scripts that expect them to be present might need to be modified (either that or they need to be added after the nand has been dumped).
The final nand reader software will automatically add/remove ECC bytes to the nand image as to try to preserve compatibility with existing software as much as possible.
Que de bonnes nouvelles ces derniers jours !
