Aller au contenu


Photo

Le Reset Glitch Hack sur Xenon est disponible *MAJ*


  • Veuillez vous connecter pour répondre
72 réponses à ce sujet

Posté 07 mars 2012 - 13:31

#1
Razkar

Razkar

    HomeBrew Lover

  • Shining VIP
  • 6 098 messages
  • Sexe:Male

La Team Xecuter rend aujourd'hui possible la réalisation du Reset Glitch Hack (initialement réalisé par GliGli & Tiros)  sur les Xbox Xenon avec un dashboard inférieur à 14717/9. Attention cependant, la version Xenon du Reset Glitch Hack est capricieuse et ne convient donc pas pour une utilisation de tous les jours. A considérer donc uniquement comme utile pour récupérer vos clés ou le KV non banni.

 

Pour pouvoir réaliser ce hack, vous trouverez dans l'archive les diagrammes pour la puce CoolRunner ainsi que les fichiers JED/XSVF. Pour la création du fichier ECC, il vous faudra utiliser le J-runner ou le build.py disponible en téléchargement en bas de la news.

 

Voici le message et les explications de la Team :

 

Wiring

Generate your ecc image using the latest version of J-Runner and flash to your NAND (+w16 just like a regular RGH).

Program your TX CoolRunner (or whatever flavor RGH mod you are using) with the tx-xenon.xsvf or tx-xenon.jed file.

The Xenon has a capacitor on CPU_RST that was removed in later models.  C7R112 (located near the xclamp under the CPU) must be de-soldered, and the CPU_RST wire from the TX CoolRunner(D) must be soldered to the left pad (non grounded pad).

A 47nf ( 0.047uf) capacitor needs to be added between PLL_BYPASS(+) and GND(-).  (If you have a genuine TX CoolRunner REV B you can use the on-board by bridging the CAP jumper)

A 220-270pf capacitor should be added between CPU_RST(+) and GND(-) on the cpld. (If you have a genuine TX CoolRunner REV B this is already included in the design so not required)

An easy to follow picture guide can be found here:  http://www.team-xecu.../phat_xenon.jpg

Troubleshooting

Using a TX CoolRunner Rev B, and after applying various troubleshooting measures we have had glitches ranging from instant to 20 minutes.

The debug LED should flash on for less than a second and repeat every 5 seconds.  If your LED stays on or does not come on at all, it is usually because of something being wrong with PLL_BYPASS.  Try different values of capacitors and wires. If you have enabled the CAP on REV B of the TX CoolRunner, simply un-bridge it and try a 47nF cap instead as per the instructions above.

If it still has not glitched after several hours, try different values of capacitors on CPU_RST of your RGH mod.  A longer wire / low-loss 50 ohm double shielded cable may also help with this.

To help increase boot times and stability (on all RGH installs not just Xenon) we recommend that you try Low-Loss Double Shielded 50 ohm cable. It's very cheap to use and quite effective – so a quick shout out to www.xconsoles.com who supplied a batch of high quality cable for our development team to use. It's less than 75 cents a foot – not bad.

NOTE: Remember when programming the TX CoolRunner that the Xbox power is NOT connected and that the switch is set to PRG before you connect the JTAG cable. If you connect the JTAG cable and it is set to NOR with the Xbox power connected, it can damage your NAND-X and/or CoolRunner. When you have finished programming, switch it back to NOR and then power on the Xbox.

The Xenon Hack

Please note that this hack is not available on consoles updated to dashboards 14717 or 14719.

If you are seeing the debug led it means that the cpu is probably not crashing and the issue addressed by gligli/tiros has been fixed (This can of course be a false positive as sometimes the CPU could be crashing but the SMC restarts fine – we can never be 100% sure)

So far, this is really only useful for a one time cpu_key dump. There will undoubtedly be ways of optimizing this hack in the future and who knows, it may become a reliable glitch one day.

We would appreciate that you give as much feedback to our support forums as possible to help others achieve better results and to improve this method. For now we can leave this and go back to RGH2.0 for Zephyr, Falcon, Jasper and also of course, the Corona.

TX CoolRunner Support Forums: http://www.team-xecu...splay.php?f=174

Enjoy!

Xbox 360 Xenon RGH Hack brought to you by the Xecuter RGH Development Team

www.team-xecuter.com

Thanks

Thanks are extended to Tiros & Gligli, without your work none of this would have been possible.

A special thanks goes out to cOz – your work on Dashlaunch proved to be an invaluable contribution and we look froward to your next exciting project.

Greets: Team Jungle, Team FSD, Freeboot, Libxenon & RGLoader.

 

*MAJ*

La Team Xecuter publie ce soir le build.py permettant ainsi aux personnes ne souhaitant pas utiliser de GUI (ou autre) de créer leurs fichiers ECC. Elle précise également que nitram a releasé un build.py pour le RGH Slim mieux codé selon eux et sans commentaire à la fin :)

 

Voici son message :

 

Here is the build.py for Xecuter's Xenon RGH Hack

J-Runner has no use for build.py as it doesn't use Python (or Nandpro) but figured there would be some guys out there who still use this method.

Thanks to:

RF1911 for the CB-A 7375
 GliGli & Tiros for the original build.py
 cOz for the Universal patch
 To the Xecuter RGH team – you know who you are.

Greets to:
 #libxenon #FreeStyleDash #freeboot #rgloader #J-Runner #JungleFlasher #c4e


  • Retour en haut

Posté 07 mars 2012 - 13:34

#2
stephane76700

stephane76700

    Sunriseur avancé

  • Technicien
  • 392 messages
  • Sexe:Male
  • Lieu:Le Havre
Eh beh ! Ça bouge en ce moment, perso je passerai pas de temps sur ce type de console, trop peu fiable dans le temps. Elles sont toutes en fin de vie les xenon :/
  • Retour en haut

Posté 07 mars 2012 - 13:36

#3
Manethon

Manethon

    Modding addict

  • Technicien LS expert
  • 21 721 messages
  • Sexe:Male
  • Lieu:Valenciennes Nord 59
ay ay c'est du lourd je vais pouvoir rendre fonctionnelles toutes les xenons empilées chez moi
  • Retour en haut

Posté 07 mars 2012 - 13:43

#4
mrfiz

mrfiz

    Sunriseur elite

  • Technicien
  • 1 103 messages
  • Sexe:Male
  • Lieu:Arras dans le 62
  • Passions:Tout ce qui me rend moins con...
La boucle est presque bouclée, c'est une bonne nouvelle ;)
  • Retour en haut

Posté 07 mars 2012 - 13:45

#5
patograso

patograso

    Sunriseur avancé

  • Technicien
  • 949 messages
  • Sexe:Male
  • Lieu:autun(71400)
  • Passions:flash xbox, modding consoles
manque plus que les corona
  • Retour en haut

Posté 07 mars 2012 - 13:47

#6
sirano

sirano

    Sunriseur

  • Members
  • PipPip
  • 279 messages
  • Sexe:Male
  • Lieu:Unknown !!!
Ce n'est pas d'une grande utilité ,ils auraient du se concentrer sur Corona que sur les Xenon .

Image IPB

  • Retour en haut

Posté 07 mars 2012 - 13:53

#7
DroYze

DroYze

    Sunriseur avancé

  • Technicien
  • 678 messages
  • Sexe:Male
  • Lieu:BZH
Dommage que ce ne soit pas utilisable tous les jours

Flash en Bretagne, Pays de Lorient -----> Bzflash.56@gmail.com ou http://www.logic-sun...360-guidel.html

  • Retour en haut

Posté 07 mars 2012 - 14:09

#8
RomAnOCrY

RomAnOCrY

    CryptoManiac

  • Modérateur
  • 2 042 messages
  • Sexe:Male
  • Lieu:28
  • Passions:https://romainj.com
Et hop les fichiers .SFV qu'ils ne fournissent pas puisqu'ils veulent qu'on utilise Nandpro 3.0 et leur Xnand..;

Voici donc les .sfv a utilisé avec 360GcProg ou impact et votre cable JtU :)

http://dl.free.fr/eztlCKy9x
  • Retour en haut

Posté 07 mars 2012 - 14:20

#9
milhouse08

milhouse08

    Fags VAG Owner

  • Shining VIP
  • 2 842 messages
  • Sexe:Male
  • Lieu:Charleville mézières - Lille
enfin comme ils disent cest pas dutout stable ;)
puis bon ... les Xenon ca reste des xbox cramée d'avance :P

le principal cst le glitch sur les 147xx ca c'est cool :P

Flash xbox360 - pose xkey / wazabi dans le 08 et 59

  • Retour en haut

Posté 07 mars 2012 - 14:29

#10
yellowmoon

yellowmoon

    Sunriseur

  • Members
  • PipPip
  • 134 messages
salut ls,

il veulent dire quoi par " non utilisable au quotidien" ça veut dire que les temps de boot vont être long ou . . .

car bon en xbox de secours chez ma copine ça ferai bien l'affaire une xenon avec les ventillos a 100% :badplayer:
  • Retour en haut

Posté 07 mars 2012 - 14:37

#11
Toxyn

Toxyn

    Poney Volant

  • Modérateur
  • 4 524 messages
  • Sexe:Male
P'tetre trouver une utilité aux tas de xenons chez moi du coup :)

Hack de toutes vos consoles Xbox 360 et Wii sur Saint-Malo et sa région
Consoles Fat ou Slim - Flash, Hack JTAG, Reset Glitch Hack, pose Xkey

Modification des leds manettes et consoles
07.86.39.68.30
Plus de détails et commentaires sur mon annonce

  • Retour en haut

Posté 07 mars 2012 - 14:54

#12
FuRiouZeHD

FuRiouZeHD

    Sunriseur avancé

  • Technicien
  • 344 messages
  • Sexe:Male
Pas besoin de puce glitch pour récupérer la clé dvd :skeptical: ?
  • Retour en haut

Posté 07 mars 2012 - 15:09

#13
TiKHAL

TiKHAL

    Sunriseur

  • Members
  • PipPip
  • 65 messages
  • Sexe:Male
  • Lieu:Réunion
Avoir le code aurait permis à d'autre d'améliorer leur hack...
  • Retour en haut

Posté 07 mars 2012 - 15:22

#14
Millenium

Millenium

    Sunriseur PRIVILEGE

  • Shining VIP
  • 3 134 messages
  • Sexe:Male

Pas besoin de puce glitch pour récupérer la clé dvd :skeptical: ?

Et quand tu l'as perdue ? ^^
  • Retour en haut

Posté 07 mars 2012 - 15:43

#15
tribale76

tribale76

    Sunriseur PRIVILEGE

  • Technicien
  • 3 355 messages
  • Sexe:Male
  • Lieu:LERY
+1 MANETHON idem pour moi ;)
manque plus que les corona et c'est la fête

Tech-niko

 

 

Modification et réparation console dans le 76 et le 27

 

CFW, XKEY, RGH, Linkers, etc....

 

 

plus de 10 ans d'expériences à votre service

 

 

  • Retour en haut

Posté 07 mars 2012 - 15:45

#16
Peach Hawk

Peach Hawk

    Sunriseur PRIVILEGE

  • Technicien LS expert
  • 2 324 messages
  • Sexe:Not Telling
"Le Reset Glitch Hack sur Xenon est disponible"

(Mal)heureusement ce sont les Xenon qui ne seront plus disponibles pour le RGH ^^
  • Retour en haut

Posté 07 mars 2012 - 15:53

#17
Guest_ethanami_*

Guest_ethanami_*
  • Guests
C'est pas mal mais comme il a été dit, c'est une révision de carte mère en fin de vie et les recherches devraient se tourner sur les CB 5772 ou corona.

Total respect pour leur travail!!!
  • Retour en haut

Posté 07 mars 2012 - 16:07

#18
choc

choc

    .................................

  • Members
  • PipPipPipPip
  • 1 263 messages
  • Sexe:Male
  • Lieu:64
  • Passions:informatique,electronique,Hack en tout genre,mécanique.......
sa était simplement fait pour démontrer qu'il n'y a pas besoin du chip hana pour faire glitcher,maintenant pour les coronas c'est pas la meme chose ce n'est tout simplement pas faisable avec le materiel actuel va falloir que les teams nous pondentdu nouveau matos,enfin je pense reste a faire confirmer par les pros

:shadows: :shadows:

  • Retour en haut

Posté 07 mars 2012 - 16:07

#19
jxbox360

jxbox360

    Nouveau / peu actif

  • Members
  • Pip
  • 8 messages
Ahahahhahahahhahahahhahah the hack is open,not closed :)


I LOVE
consoleopen

and

xebuild gui
autoGG
multibuilder


the hack is open,not closed :)

Modifié par jxbox360, 07 mars 2012 - 16:13.

  • Retour en haut

Posté 07 mars 2012 - 16:11

#20
Razkar

Razkar

    HomeBrew Lover

  • Shining VIP
  • 6 098 messages
  • Sexe:Male

Ahahahhahahahhahahahhahah the hack is open,not closed :)

you have the source of TX improvment ? (Build.py (+associated files) + ISE source files for the jed?).
No? so it's closed now :)

rndd8.png

Homebrew-connection.org

Modification de console dans le 76

  • Retour en haut




0 utilisateur(s) li(sen)t ce sujet

0 invité(s) et 0 utilisateur(s) anonyme(s)