Aller au contenu


Photo

Failed to mount SD cart. Mais carte SD détécté par switch.


  • Veuillez vous connecter pour répondre
5 réponses à ce sujet

Posté 05 novembre 2022 - 03:47

#1
DejanSRB

DejanSRB

    Nouveau / peu actif

  • Members
  • Pip
  • 2 messages

Bonjour,

J'ai fais changer le lecteur SD de ma switch à Micromania car il était endommagé. Depuis lorsque j'essaie d'injecter le payload via tegrarcm ou mon rcm loader il est impossible de l'injecter car l'erreur "failed to mount SD card" apparait. J'ai essayé avec une autre carte SD de 32 GO en fat cela n'a pas fonctionné. Ma carte SD principale étant une samsung EVO de 256GO que j'avais également passé en fat 32 via le logiciel guiformat. Quelqu'un a déjà vécu quelque chose de semblable et auriez vous des solutions ?

Merci d'avance


  • Retour en haut

Posté 05 novembre 2022 - 15:24

#2
Erko

Erko

    Sunriseur elite

  • Members
  • PipPipPipPip
  • 1 419 messages
  • Sexe:Male
  • Lieu:Belgique, Liège
Ils ont peut-être mal connecter le lecteur sd
Ou bien ton problème de départ était peut-être ton connecteur sur la carte mère
Ce connecteur est pas réputé pour être fiable dans le temps
Si bien sur on part du principe que tes sd ne sont pas des contrefaçon sans vouloir critiquer, bcp se sont fait avoir
Quoiqu'il en soit faut démonter la console est check
En sysnand ta console reconnaît la sd ?

PS4 Fat OFW 5.05, PS3 Slim (DECH) CFW rebug 4.81.2 DEX, PS Vita Slim 3.60 HENkaku, Nintendo New 3DS XL CFW Luma3ds-Boot9strap, Nintendo Switch 4.0.1

  • Retour en haut

Posté 12 novembre 2022 - 17:42

#3
DejanSRB

DejanSRB

    Nouveau / peu actif

  • Members
  • Pip
  • 2 messages

Oui en sysnand la console détecte la SD. Avant que je change mon lecteur SD, j'avais une erreur la console ne détectait pas la carte SD et elle redémadarait à chaque fois que je jouais même en sysnand. Maintenant je peux jouer en sysnand mais je peux pas injecter de payload.

Il est possible que mes SD soient de contrefaçon, cela pourrait-il influer ?

Ca fait une semaine que je cherche, le mec qui m'a changé le lecteur SD m'a dit s'occuper rarement des switch. Je ne sais pas quoi faire, je me tâte à ouvrir la console et regarder par moi même mais je n'ai aucune connaissance j'ai peur de flinguer ma console.


  • Retour en haut

Posté 31 mars 2023 - 06:54

#4
richard732

richard732

    Nouveau / peu actif

  • Banned
  • Pip
  • 8 messages
It seems that replacing the SD card reader on your Nintendo Switch caused problems with payload injection via TegraRcm or your RCM Loader. The first thing to check is whether the SD card itself is damaged or not. You have already tried with another 32GB SD card, but it did not work, so it may indicate that the problem is not with the SD card itself.
 
Another thing to check is if the SD card is properly inserted in the new SD card reader. Sometimes there can be connection problems if the SD card is not inserted correctly or if the SD card reader is faulty.
 
If you have verified that the SD card is properly inserted and not damaged, you can try reformatting the SD card. This may resolve mounting and compatibility issues with your Nintendo Switch system. Make sure to back up all important data before reformatting the SD card as this will erase all data stored on it.
 
To reformat the SD card, you can use third-party software such as SD Card Formatter. This software can format the SD card using exFAT or FAT32 file system, depending on your Nintendo Switch needs. Make sure to select full format to avoid data corruption issues. If the problem persists after checking the SD card and reformatting the SD card, it is possible that the new SD card reader has a manufacturing defect. In this case, it may be necessary to contact Micromania Customer Service for further assistance.

Modifié par richard732, 04 avril 2023 - 04:41.

  • Retour en haut

Posté 12 avril 2023 - 13:23

#5
JanicePollard

JanicePollard

    Nouveau / peu actif

  • Members
  • Pip
  • 1 messages

It is possible that the replacement of the SD card reader carried out by Micromania was not carried out correctly or damaged the SD card slot. It is also possible that the SD card is not recognized due to compatibility issues or formatting errors. mybkexperience

A potential solution would be to try another SD card reader or use another SD card to see if the problem persists. It may also be worth checking with Micromania to see if they can diagnose and fix the problem with the SD card slot.


Modifié par JanicePollard, 13 avril 2023 - 04:54.

  • Retour en haut

Posté 06 décembre 2023 - 10:28

#6
JordanB2003

JordanB2003

    Nouveau / peu actif

  • Members
  • Pip
  • 1 messages

It's conceivable that Micromania damaged the SD card slot or performed an incorrect replacement of the SD card reader. It's also conceivable that formatting mistakes or compatibility problems are the reason the SD card is not detected. MyBKExperience.com


  • Retour en haut




0 utilisateur(s) li(sen)t ce sujet

0 invité(s) et 0 utilisateur(s) anonyme(s)