La Team Rebug nous propose son nouveau firmware officiel, le Rebug 4.65.2 est donc disponible avec Cobra 7.03 et sa boite à outils Toolbox 2.02.02. Bref, un beau cadeau de la part de la Team Rebug !
LATEST REBUG FIRMWARE BUILDSD-REX Cobra 7.03 EDITION – INSTALL ON DEX PS3 SYSTEMREBUG 4.65.2 D-REX EDITION – JAN. 13TH 2015(See below for full D-REX EDITION features)REX Cobra 7.03 EDITION – INSTALL ON CEX PS3 SYSTEMREBUG 4.65.2 REX EDITION – JAN. 13TH 2015(See below for full REX EDITION features)FEATURES FOR REBUG REX/D-REX EDITIONFEATURE – Dual LV2 Kernels CEX/DEX(Swap your EID0/LV2 kernel using Rebug Toolbox in seconds)FEATURE – ALL Retail functions available in CEX mode(No need to install different firmware)FEATURE – ALL Debug functions available in DEX mode(No need to install different firmware)FEATURE – ProDG Connectivity in DEX mode(Full Support on Normal mode, Partial Support on Cobra mode)FEATURE – QA Token compatibilityFEATURE – OtherOS++ support enabled(Use Rebug Toolbox to Boot OtherOS with different LV1 patches)FEATURE – Package Manager(Replacement for the standard ‘Install Package Files’ option)INCLUDED – Rebug Toolbox 02.02.02(Install included Rebug Toolbox or higher for full compatibility)PATCHED – LV1: Disable System Integrity Check(Safe to use with mismatched COREOS/SYSCON versions or if PS3 is not QA enabled)PATCHED – LV1: Undocumented function 114(Allow mapping of protected memory)PATCHED – LV1: Skip all ACL Checks(Needed to allow booting of OtherOS)PATCHED – LV1: Peek and Poke support(Unused LV1 call 182 and 183)PATCHED - LV2: Peek and Poke support(LV2 Syscall 6 and 7)PATCHED - LV2: Peek and Poke support for LV1(LV2 Syscall 8 and 9)PATCHED - LV2: LV1 CALL System call(LV2 Syscall 10)PATCHED - VSH: Allow Unsigned act.dat and *.rif filesPATCHED - VSH: Disable Unlinking/Deleting of act.datFUN FEATURE – Fake Save Data Owner(Use Game Saves from ANY Owner)FUN FEATURE – Enhanced Remote Play with PC(This unlocks the limitation of working apps/games for remote play with PC )FUN FEATURE – Lock/Unlock TrophiesFEATURE – RSOD Bypass for Installation Only(This does not fix the issue itself, but This will allow PS3 to boot fine)FUN FEATURE – Cinavia protection fully disabled(Supports optical media/bd iso, AACS must be decrypted)FEATURE – Cobra 7.03(Disabled by default, Toolbox required to enable)FEATURE – 1.41.05 MOD REBUG EDITION(Full Webman intergration supports both CEX/DEX 4.65)FEATURE – 4.66 Version Spoofer(REBUG Mode on TOOLBOX is required for PSN /SEN Access, until next OFW update)PACKAGE MANAGERPackage Manager is a replacement for the standard Install Package Files option under Game in the XMB. It allows for the install and deletion of .pkg files from dev_hdd0/packages, dev_usb/packages and the standard Install Package Files locations. In addition to this, your downloaded PSN content ‘bubbles’ will appear under this option instead of cluttering your Game menu with uninstalled content.USAGE:Navigate to Game in your XMB and click on Package Manager (It will be where Install Package Files usually is). You will find three options.PlayStation®Network ContentManage your downloaded PlayStation®Network Content.Install Package FilesINSTALL package files from Storage Devices and your PS3.PS3 Hard Disk (dev_hdd0/packages)Package Folder (dev_usb/packages)Standard Package Location (Standard Install Package Files locations)NOTE: The Install All Packages is only available by pressing the TRIANGLE button when the Standard Package Location option is highlighted because the PS3 will only install ALL packages from the root of a storage device as of the moment.Delete Package FilesDELETE package files from Storage Devices and your PS3.PS3 Hard Disk (dev_hdd0/packages)Package Folder (dev_usb/packages)Standard Package Location (Standard Install Package Files locations)DELETING FILES:1: Highlight the file you would like to delete and press TRIANGLE. The sidebar should appear.2: Press CROSS on either Unlink or Unlink(Folder) (Both do the same thing for now).REBUG TOOLBOXRebug Toolbox is application designed to complete the full function of REBUG REX EDITION firmwares. Besides from performing the CEX/DEX EID0 and LV2 Kernel Swapping it is also an FTP server and is packed with a bunch of other useful tools.INSTALL:1: In the PS3 XMB go to Game menu2: Select Package Manager3: Select Install Package Files4: Select PS3 Hard Disk5: Select REBUG-TOOLBOX-02.xx.xx.pkgCobra 7.03What is Cobra 7.XX?Cobra 6.0 and lower was CobraUSB and needed a USB dongle to use its unique features,. This was the first product by the Cobra Team who is now behind the CobraODE. After the Cobra Team launched the first ODE device, Community News Writer STLcardsWS inquired about the future of the CobraUSB device as it seemed to be shelved (unofficially at the time). STLcardsWS according to the Cobra Team Representative Magneto asked if the device could be made open source for the community, since the team had all but moved onto ODE products. That is when Team Cobra gave in and threw a bone to the PS3 Homebrew Community. Shortly, after that time is when we seen the first official source code release of CobraUSB (link of this story). While this proved to be a huge advancement in the PS3 development community it however was a rough release as it contained all the USB security source code also. While developer’s like u$er was able to use parts and makes sense of some of the functions (which helped create PRX Loader, the first plugin system for the PS3)., most developer struggled with the source as it had alot of unnecessary parts included to protect the USB device when the Cobra Devs wanted to keep this system closed sourced. .Several weeks later, the Lead CobraUSB developer (who was not aware of the first release when it happened) released the first Dongle-Less Cobra CFW using Rogero’s 4.46 CFW as a base. The developer also updated Cobra 6.0 to Cobra 7.0 with new features and cleaned the source removing all the security garbage (link to this story). Thus making it a complete release with full instructions and details for scene developers. Since that time we have seen its evolve and added to many CFW’s. Below you can view some of the features that are built into Cobra System with some additional explanations.How to Enable Cobra Features:By default Cobra 7.03 is disabled, to enable the Cobra Features simply access the REBUG Toolbox.INSTALL:1: On the XMB select Package Manager2: Select Install Package Files3: Select PS3 System Storage4: Select REBUG-TOOLBOX-02.02.02.pkg5: Access Rebug Toolbox from XMB6: Scroll to 2nd column Selector, and select 3rd option Toggle Cobra Mode7: Select Enable, and system will reboot with Cobra now enabled on the CFW.
Cobra 7.03 OverviewPRX plugins at boot time (sprx)ISO Suppport: PS1/PS2/PS3/PSP/DVD/BluRay (Split ISO support on FAT32 drives)Network Support: PS1/PS3/DVD/BluRay /PKGs (guide)Blu Ray Movie region free functionalityNTFS HDD Support (prepNTFS, or multiMAN Required to scan contents)PS2 ISO Support for BC (HW) / non-BC (SW) ConsolesSyscall 11 – Cobra lv1 Peek*PS2 Support on Internal HDD ONLY: dev_hdd0/PS2ISO/General Cobra Plugin InformationSupport for plugins at boot time:The number of vsh plugins has been increased from 1 to 7 slots.Slot 0 is reserved for use for iso plugins (netiso.sprx and rawseciso.sprx).Slots 1-6 are for boot plugins.Plugins are loaded in the following way:text file: /dev_hdd0/boot_plugins.txt shall contain a plugin path per line.How to Install a Plugin:Copy plugin_name.sprx to you internal ps3 hdd (ex: /dev_hdd0/).Create or Edit boot_plugins.txt in the root of the hdd (/dev_hd00/boot_plugins.txt) and add a line for the new plugin. Assuming you placed the sprx also in the root of the disk, add: /dev_hdd0/plugin_name.sprx). Add a new line for each plugin.Then Reboot PS3 Console!Cobra 7.03 PS2 Features (4.65 Cobra)PlayStation 2 on NON-BC ConsolesSoftware (SW) Emulation:Support for PS2 ISOs in non BC consoles was removed in Cobra 4.30 (usb), due tops2_softemu missing. It has been re-enabled now by hacking of ps2_netemu. You can use it in the same way as before, just load an ISO and launch from disc icon, Cobra core takes care of rest. No need for encrypted isos, isos patched with limg sectors, etc. Just your normal PS2 isos dumped from discs. However, there is no support for optical discs in ps2_netemu.Note 1: Don’t forget to set the memory cards in XMB, in the old memory card utility for PS/PS2, as ps2_netemu won’t let you assign them in game.Note 2: Please use PS2 ISO / Classic Launcher (non-BC only for wireless sync issue) method to fix the issue with wireless pad sync issue. RAP activation via reactPSN is requiredPlayStation 2 on BC ConsolesHardware (HW) Emulation:PS3 Models: CECHA, CECHB, CECHC and CECHE Backwards Compatible (BC) Consoles will still use their respetive emulators(ps2_emu, ps2_gxemu), which have much better compatibility and also support optical discs, original or backup.
Liens de téléchargement :
REBUG_4.65.2_D-REX – 46e531ff271e02d137cc960100a1006e
Le D-REX est pour DEX
REBUG_4.65.2_REX – c18eecd7e91320e759432f21d07b1f4c
Le REX est pour CEX
REBUG_TOOLBOX_02.02.02 - 1576ec41fda37c9d44a05ae0c29a319d
REBUG_TOOLBOX_02.02.02_PS2 - b75a17cb29ecbc38a6c873f05da8e9ff
Patché pour PS2
PS2 Launcher REBUG EditionPS2 Launcher REBUG Edition
Modifié par tralala, 14 janvier 2015 - 08:43.
