Pas simple ton histoire. C'est déjà pas évident en CEX, alors en DEX...
Le plus sur est de repasser en CEX dans un premier temps avec un rebug DREX patché noBD + toolbox. Ensuite remariage via fsm ou CFW settings. Puis repasser en DEX si besoin.
Donc en bref t'installe:
Drex 4.78 nobd:
http://www.logic-sun...n-officiel.htmlT'installer la dernière toolbox.
Tu passe en full CEX.
Tu Dump la root key et tu la met sur une clé usb.
T'installe ce ferrox 4.78 qui intègre CFW settings:
https://www.mediafir...ET_PS3UPDAT.PUPTu passe en FSM et tu remarie à l'aide de la root key:
1) Toggle Factory Service Mode (should be easy now)
2) Put "eid_root_key" that belongs to the console to /dev_usb/
3) Select Remarry Bluray Drive in Network->cfw-settings->Remarry Bluray Drive
4) If everything went fine it should have notified: "CEX_drive_init() succeeded"
5) Dont forget to repair CRL/DRL if you need to fix it
Successfully remarried /dev_usb/cfw-settings.log should look like:
2011-12-31 19:00:24 [xai_plugin] : : _xai_plugin_prx_entry()
2011-12-31 19:00:24 [xai_plugin] : 1 : xai_plugin_init()
2011-12-31 19:00:24 [xai_plugin] : 1 : xai_plugin_start()
2011-12-31 19:00:24 [xai_plugin] : ACT0 : xai_plugin_action(remarry_bd)
Looking for lv1 offset
Found lv1 code @0xac574
EID2 P-Block decrypted
EID2 S-Block decrypted
sys_storage_open(bdvd) = 0
stg BDVD Auto Request Sense OFF success = 0
Identified Drive = SONY PS-SYSTEM 302R4154
ps3rom_lv2_mode_select(2) = 0
ps3rom_lv2_write_buffer(2,60) = 0
ps3rom_lv2_mode_select(3) = 0
ps3rom_lv2_write_buffer(3,670) = 0
ps3rom_lv2_mode_select(4) = 0
ps3rom_lv2_write_buffer(4,8000) = 0
CEX_drive_init() succeeded
2011-12-31 19:01:20 [xai_plugin] : ACT0 : xai_plugin_action(service_mode)
Product Mode Disabled
Tu met un film bd pour restaurer les drl.
Tu sort du fsm.
Puis t'installe ce que tu veux comme CFW.
Modifié par littlebalup, 25 avril 2017 - 12:09.