
Help me
Débuté par Chatpr, sept. 21 2018 17:11
4 réponses à ce sujet
Posté 21 septembre 2018 - 17:11
#1
Help me I do not know what to do :
GodMode9
Warning:
Not running from a boot9strap compatible entrypoint.Not everythink may workcas ecpected.
Provide the recommended aeskeydb.bin file to make this warning go away.
GodMode9
Warning:
Not running from a boot9strap compatible entrypoint.Not everythink may workcas ecpected.
Provide the recommended aeskeydb.bin file to make this warning go away.
Posté 21 septembre 2018 - 17:16
#2
https://3ds.hacks.gu...9lh-to-b9s.html
puis cherche le fichier ...
Attendez que tous les tests de sécurité soient finis
- Si vous obtenez une erreur “OTP Crypto Fail”, télécharger - aeskeydb.bin, then put it in the /boot9strap/ folder on your SD card and try again
Tuto Switch
Obtenir son propre prod.key simplement en Firm 6.0
Lancer vos nsp facilement avec ReiNX
Tuto 3DS
Mon tuto en Firmware 11.8 (de la trad) pour 2 euro
Convertir .3ds en .cia avec godmod
Dumpé un jeu cartouche ou eshop avec godmod
Emulateur
Dossier pour l' émulateur Ryujinx ou yuzu
Comment faire une build de yuzu ou citra sois même
Informatique Formatage
Formatage de clé/µsd en exfat simplement avec Rufus
Obtenir son propre prod.key simplement en Firm 6.0
Lancer vos nsp facilement avec ReiNX
Tuto 3DS
Mon tuto en Firmware 11.8 (de la trad) pour 2 euro
Convertir .3ds en .cia avec godmod
Dumpé un jeu cartouche ou eshop avec godmod
Emulateur
Dossier pour l' émulateur Ryujinx ou yuzu
Comment faire une build de yuzu ou citra sois même
Informatique Formatage
Formatage de clé/µsd en exfat simplement avec Rufus
Posté 21 septembre 2018 - 17:26
#3
Posté 21 septembre 2018 - 18:33
#4
The problem is that it launches me directly godmode9 so I can not launch SafeB9SInstaller
Posté 21 septembre 2018 - 20:15
#5
If you have a9lh with a old version of luma3ds, you need to rename your payloads file to "y_filename.bin" (ex: y_SafeB9SInstaller.bin). Hold a "y" button on boot for start safeb9sinstaller
Other option, download the 7.0.5 version of luma3ds for have the chain loader menu for select the payload you need.
All time, you need a folder nammed "payloads" in the "luma" folder. All payloads have to be in the folder "payloads"
Other option, download the 7.0.5 version of luma3ds for have the chain loader menu for select the payload you need.
All time, you need a folder nammed "payloads" in the "luma" folder. All payloads have to be in the folder "payloads"
Modifié par Molo1000, 21 septembre 2018 - 20:39.
1 utilisateur(s) li(sen)t ce sujet
0 invité(s) et 1 utilisateur(s) anonyme(s)