Le désormais très célèbre Habib, nous fait part d'une de ses toutes dernières nouveautés. A savoir la possibilité d'activer/désactiver le QA directement depuis un CFW supérieur à 4.21 sans avoir à repasser par la case 3.55. Et ceci, via son "Habib Toolbox".
Aurait il réinventé la poudre sachant que cette fonction existait déjà depuis les CFW Rebug via la Rebug Toolbox?
Peut être un peu. Mais on doit reconnaître que cette trouvaille semble avoir l'avantage de pouvoir être utilisé sur n'importe quel CFW. De plus, comme à son habitude, Habib met à disposition ses sources. Ce qui devrait permettre de voir fleurir un grand nombre de mise à jour d'Homebrew intégrant ce QA Toggle.
Pour le moment cet outil n'a pas été testé sur beaucoup de configuration. La prudence est donc de mise.
Voici les mots d'Habib:
since 4.xx(prolly 3.56+) sony protected the qa thing with ecdsa and we cant access it through UM in the gameos(preventing token from being written)
so i just started once to look around qa.i was able to do it on 3.55 but not on 4.xx.
now what i did to make that working was that i accessed HV scm through dm using VUART(packet id=0x900C) and wrote the token.this can be done from linux easily but we want from gameos right?
sooooo I SUCCEEDED!!!
this has been ported to habib toolbox and is bumped to v1.02.01 with many new features:
1.lv1 dump
2.lv2 swap from dev_flash or usb000
3.toggle qa
now i also made a standalone version with UGLY UNCLEANED SOURCE with all the **** i have tried past this week almost
standalone version can be easily updated by updating around 7 offsets(6 lv1 and 1 lv2 for hvsc redirect)
http://www.mediafire....wj50x3w/qa.rar
happy studying and using!!!!
PORTING:
1.main.c offsets
2.lv1_hvcall.c offset(lv2)
NOTE:
this has been tested on 2 consoles and so far no problem is there BUT we dont make any guarantees
this works on 4.65 but can be ported easily
UPDATE:
http://www.mediafire....c9c1cq4/qa.zip
FW INDEPENDANT!!!!!!(unless sony makes GREAT changes)
on a "non supported fw" it takes 20 seconds to qa
tested on 4.65 cobra/non-cobra and 4.60 cfw
if for some reason it doesnt work on some fw then it requires porting offsets.
and its for 4.21+ cfw only
how lucky i am to have syscall 11
Source : http://www.ps3hax.ne...ll=1#post802836
UPDATE 1 : Nouvelle version (pour CFW 4.65 seulement) avec correction de bug... + un FSM toggle!!!
ITS FOR 4.65 ONLY!!!!!
http://www.mediafire...1448slahle8s7va
toolbox 1.02.02
NO FIRMWARE INDEPENDANT!!!!
src for standalone is in there
changelog for toolbox:
1,fixed token writing of qa
2.fsm toggle is in there for you(normal 3.55 diag can be used to exit)
changelog for standalone:
1.fixed token writing for qa
2.NO FW INDEPENDANT, FOR 4.65 ONLY!!!
ENJOY!!!!!!!!
p.s i might make this fw independant in future
do note that toolbox is for habib 4.65 cobra toggle version and any 4.65 cobra edition
Source: http://www.ps3hax.ne...ll=1#post803501
UPDATE 2 : Et voici la version "Standalone" (c'est à dire sans la Toolbox) compatible tous CFW4.21+
http://www.mediafire.../standalone.rar
this is firmware independant(for 4.21+)
J'oublie d'ajouter que il est preferable d'abord desactiver QA Toggle pour CFW 3.55 avant d'activer ce Habib QA Toggle. Cela permet d'eviter le bug au cas ou.
J'oublie d'ajouter que il est preferable d'abord desactiver QA Toggle pour CFW 3.55 avant d'activer ce Habib QA Toggle. Cela permet d'eviter le bug au cas ou.
Si on fait comme tu décris aussi bien pas mettre celui d habib car 2 qa flag sert a rien.
Sinon c est cool ca donc plus besoin de passer via le downgrader, un coup de qa flag en 4.65 et ensuite on peut mettre sur le cfw voulu, un gain de temps.
Pour ca, on enleve l'ancien QA Toggle pour installer Habib QA
Perso j'ai installé le pkg, et toggled le QA, mais en faisant la combinaison de touches sur le XMB, je n'ai rien ...
ouai marche pas sur habib 4.65 cobra j'ai install le toggle QA et activer avec select dans la toolbox je fais ensuite la manip sur reseau et ça marche pas !
Je l'ai testé. Ca marche sous CFW Darkness Cobra 4.65 CEX 1.00v.
Je vous explique : Installer ce pkg Habib QA. Ensuite entrer dans cette application. Appuyer le bouton SELECT pour activer ou desactiver QA. Appuyer Croix pour " DONNE ! OK". Appuyer sur " PS " pour quitter cette application.
C'est l'excellent outil je trouve
Question conne: Ca sert à quoi ..?
MerciQuestion conne: Ca sert à quoi ..?
QA permet de changer un CFW en activant lv1 (entre CFW Rebug et CFW Rogero/Habib par exemple).
Je l'ai testé. Ca marche sous CFW Darkness Cobra 4.65 CEX 1.00v.
Je vous explique : Installer ce pkg Habib QA. Ensuite entrer dans cette application. Appuyer le bouton SELECT pour activer ou desactiver QA. Appuyer Croix pour " DONNE ! OK". Appuyer sur " PS " pour quitter cette application.
C'est l'excellent outil je trouve
Le lien mediafire est out ...
[EDIT] Au temps pour moi, mais il faut passer par le lien direct sur ps3hax, et pas cliquer le lien de la news
Qu'est ce donc le FSM ?
[EDIT] Le menu du QA apparait bien avec la manip des touches, c'est donc fonctionnel.
[EDIT2] Ok le FSM c'est le Factory mode, et si c'est fonctionnel, effectivement, là je dis chapeau ! En gros, un downgrade sans dongle...
le mode factory dispo en 3.56 +? ok mais comment en sortir pas de Lv2dial.self
le mode factory dispo en 3.56 +? ok mais comment en sortir pas de Lv2dial.self
normal 3.55 diag can be used to exit
le mode factory dispo en 3.56 +? ok mais comment en sortir pas de Lv2dial.self
normal 3.55 diag can be used to exit
ok j'ai eu un petit espoir un frisson lol donc rien de neuf juste un confort en plus
UPDATE #2:(2014-10-13)
ITS FOR 4.65 ONLY!!!!!
http://www.mediafire...qa_flag_465.rar
Non merci. A propos de Mode Factory c'est le passé pour des particuliers....
toolbox 1.02.02
NO FIRMWARE INDEPENDANT!!!!
src for standalone is in there
changelog for toolbox:
1,fixed token writing of qa
2.fsm toggle is in there for you(normal 3.55 diag can be used to exit)
changelog for standalone:
1.fixed token writing for qa
2.NO FW INDEPENDANT, FOR 4.65 ONLY!!!
ENJOY!!!!!!!!
p.s i might make this fw independant in future
do note that toolbox is for habib 4.65 cobra toggle version and any 4.65 cobra edition
UPDATE:
http://www.mediafire.../standalone.rar
its now fw independant for 4.21+
for any reason if this doesnt work with the upcoming releases, porting is required
tested on 4.65 and 4.60
UPDATE #2:(2014-10-13)
ITS FOR 4.65 ONLY!!!!!
http://www.mediafire...qa_flag_465.rar
toolbox 1.02.02
NO FIRMWARE INDEPENDANT!!!!
src for standalone is in there
changelog for toolbox:
1,fixed token writing of qa
2.fsm toggle is in there for you(normal 3.55 diag can be used to exit)
changelog for standalone:
1.fixed token writing for qa
2.NO FW INDEPENDANT, FOR 4.65 ONLY!!!
ENJOY!!!!!!!!
p.s i might make this fw independant in future
do note that toolbox is for habib 4.65 cobra toggle version and any 4.65 cobra edition
UPDATE:
http://www.mediafire.../standalone.rar
its now fw independant for 4.21+
for any reason if this doesnt work with the upcoming releases, porting is required
tested on 4.65 and 4.60
News mise à jour. Merci.
Merci pour la news! Cool pour le FSM sans etre en 3.55
Mais peut-on remarier un lecteur bluray par le FSM sans passer en 3.55
Si oui? Quelle procédure?
non 3.55 obligatoire
bonne question car ma ps3 ultra slim sont lecteur a casser comme je pourrais le remarier ????
je reve la o0 sur ultra slim ...
bonne question car ma ps3 ultra slim sont lecteur a casser comme je pourrais le remarier ????
On va peut-être pas éxagérer..
banc de test 2 consoles ^^ #love