JEJE7712

Restauration Micro sd:

USBIT, or USB IMage Tool, is a small program that can create images of USB flash drives and make an exact backup image of your USB Stick.

1. Download USBIT from here --> http://www.alexpage.de/usb-image-tool/
2. Download a 3K3Y base image from here --> http://xkeydownloads....ages-110MB.zip. Use the 2.XX image.
3. Unzip USBIT and the 3K3Y base image to your hard drive.
4. Using a SD card reader, insert your micro SD into the computer.
5. Run USBIT.
6. From the top drop down select "Device Mode".
7. Select the proper storage device from the list on the left hand portion of the window.
8. Click the "Restore" button.
9. Select the 3K3Y base image
10. Once complete, exit the program.
11. Safely eject the micro SD card.
12. Seat the micro SD card in the 3k3y and make sure it locks in place.

Mise a jour:

UPDATING TO THE LATEST FIRMWARE

1. Download to the latest version of the firmware. At the time of this writing, the 2.02 is the latest and can be downloaded from here -->http://xkeydownloads.../3k3y/02.02.zip
2. Unrar the downloaded file, and copy only rootfs and uImage into the root of an USB flash drive. The flash can be formatted NTFS or Fat32.
3. Safely eject the flash drive.
4. Turn on the PS3 with no disc in and drive closed.
5. Place the flash drive into the USB dongle that is attached to the 3K3Y by the small FFC and plugged into the PS3's USB port.
6. Wait for update to complete. If no remote, allow 15 Minutes for the update to complete. If a remote is connected, watch for notification of update completion.
7. Turn OFF your PS3
8. Remove the flash drive
9. Insert the flash drive again into the computer.
10. Delete rootfs and uImage from the flash drive.
11. Copy the PROPER fpga.vme to the flash drive.
12. Safely eject the flash drive.
13. Turn on the PS3 with no disc in and drive closed.
14. Place the flash drive into the USB dongle that is attached to the 3K3Y by the small FFC and plugged into the PS3's USB port.
15. Wait for update to complete. If no remote, allow 15 Minutes for the update to complete. If a remote is connected, watch for notification of update completion.
16. Turn OFF the PS3
17. Remove the flash drive
18. Delete fgpa.vme from the flash drive.
19. Copy 3key.cfg and gyo.db to the flash drive.
20. Using notepad, carefully edit 3key.cfg on the flash drive and save it.
21. Safely eject the flash drive.
22. Turn on the PS3 with no disc in and drive closed.
23. Place the flash drive into the USB dongle that is attached to the 3K3Y by the small FFC and plugged into the PS3's USB port.
24. Wait for update to complete. If no remote, allow 15 Minutes for the update to complete. If a remote is connected, watch for notification of update completion.
25. Turn OFF the PS3
26. Remove the flash drive
27. Turn on your PS3 with no disc in and drive closed.
28. Notice the lights on the 3K3Y. Single Red light and blue light is flashing rapidly in succession of 5 flashes.
29. Success!

Now that you are up to date, the update files are no longer needed on the flash drive. They can be deleted. Do not leave the update files in the root of the same drive you plan to use for loading ISOs.