Aller au contenu


Photo

3.40 OE-A vers une version compatible RetroArch


Meilleure réponse Cytrick, 18 mai 2020 - 18:59

Le contenu de son readme.txt pour info : 

 

-------------------------

 

Updating 3.40 OE-A to Most recent OFW/CFW. ``` 
 
MAKE SURE TO HAVE 80% BATTERY+ AND CHARGER PLUGGED IN FOR WHOLE PROCESS. ENSURE THERE IS 100mb+ AVAILABLE ON MEMORYSTICK. ```
 
 
1. Put 3.52M33-1 M33Creator folder (just the folder M33Creator with its contents) into the GAME150 (:/PSP/GAME150) folder on your PSP. It contains 1.50 and 3.52 updates to create your cfw file..Make the GAME150 folder if it is not there. . .
 
Exit usb mode, run M33 CREATOR on your PSP. Process takes 15mins to make your cfw file. Follow onscreen instructions. Once finished go back to XMB and there should be 3.52M33 UPDATE. Launch it and follow instructions. It will then update you to 3.52M33-1 CFW. 
 
 
2. Once updated, copy folder M33UPDATE4 from the 3.52M33-4 folder and place it into GAME150 folder on the PSP. Launch the updater. Follow onscreen instructions. Check system settings->system information to check you are now on 3.52M33-4. 
 
 
3. UPDATE FROM 3.52M33-4 to 3.71M33:
 
- Copy the UPDATE (3.71M33 folder) directory into /PSP/GAME/UPDATE and copy the EBOOT.PBP of the 3.71 Sony updater 
there but with name "371.PBP". Note: the program will not even show if you copy it to a different folder than that.
 
- If you are in the fat psp, make sure you have configured the psp to run the game folder in the 3.XX kernel. (THIS MEANS PRESSING SELECT ON THE XMB, OPEN RECOVERY MENU, AND MAKE SURE THE GAME FOLDER/KERNAL MODE IS 3.xx NOT 1.50)
 
- Execute the program, it requires 78% of battery. If you have idstorage corrupted due to a downgrader, the program
  will ask you to correct it automatically so the update can continue.
 
- Press X, and the Sony updater will begin. Sit and enjoy while Sony code installs 3.71 M33 :)
 
- When finished, the updater will ask you to reboot (pressing X or O). DO IT. Do not skip this step
shutting down the psp by yourself, or you'll end with a brick.
 
- You should be now in 3.71 M33
 
 
4. You should now be on 3.71M33 CFW. Go to the sony website for the latest official firmware. Install it through the XMB software update option. 

Aller au message complet

  • Veuillez vous connecter pour répondre
23 réponses à ce sujet

Posté 18 mai 2020 - 00:26

#1
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

Bonjour,

J'ai retrouvé ma PSP dans mes cartons, et j'aimerai lui donné un nouveau souffle de vie avec le rétro gaming.
Pour cela j'aimerai lui installer RetroArch, j'ai une carte de 4 Go que j'ai également retrouvé.

(Déjà vos conseils sur ce choix sont les bienvenues)

J'ai essayé un UPDATE traditionnel 6.60 à partir de ce tuto :
https://www.youtube....h?v=aiLFHRwFhVI

Mais cela semble bloquer, je ne vois pas de "Mise à jour système" mais "Mise à Jour Réseau".
Cela doit venir de ma version hacké.
Et je ne voudrais pas briquer ma PSP, j'attends donc vos conseils.

Merci par avance,


  • Retour en haut

Posté 18 mai 2020 - 10:28

#2
Cimmerian

Cimmerian

    Sunriseur elite

  • Members
  • PipPipPipPip
  • 1 384 messages
  • Sexe:Male

https://www.touslesd...23&v_code=33165

met le dans PSP/GAME/UPDATE/


  • Retour en haut

Posté 18 mai 2020 - 10:44

#3
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

https://www.touslesd...23&v_code=33165

met le dans PSP/GAME/UPDATE/

Oui c'est ce que j'ai essayé dans le tuto que j'ai nommé plus haut ...
Mais je n'ai pas l'option "Mise à jour système" qui apparait seulement "Mise à Jour Réseau".

Je pense que c'est la version 3.40 OE-A qui bloque les mises à jour ...


  • Retour en haut

Posté 18 mai 2020 - 11:44

#4
Batman23

Batman23

    Sunriseur PRIVILEGE

  • Members
  • PipPipPipPipPip
  • 3 911 messages
Salut,

Le 3.40 OE-A a effectivement une securité mise par Dark Alex a l'époque pour éviter une maj accidentelle.


Donc de pense que l'ont peut utiliser: recovery flasher pour psp 1000 ou 2000 (suivant le modele de psp)

Pour flasher un cfw plus recent biensur il me semble que il faut les fichiers de firmware et la ces plus difficiles a trouver. :(

Modifié par Batman23, 18 mai 2020 - 11:50.

  • Retour en haut

Posté 18 mai 2020 - 11:49

#5
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

Merci Batman23, ou je peux trouver ce recovery flasher 1.65 ?

 

Je suis également tombé sur ce tuto : https://hackinformer...1000_3XXOE.html

mais les fichiers linkés sont offline ...


  • Retour en haut

Posté 18 mai 2020 - 11:54

#6
Batman23

Batman23

    Sunriseur PRIVILEGE

  • Members
  • PipPipPipPipPip
  • 3 911 messages
Yo,

Le problème ces que tous les lien sont dead, cela date de 2012 a 2015.

Donc bon essaye retroarch sur ta psp directement.

Sinon il faut chercher dans les fonds de google, mais ces assez ch**nt.

d'ailleurs ma psp est rester en 5.50genD2 a cause des fichiers mort sur le net ^^


Sinon utilise retroarch sur : android (tablette/smartphone)

Sinon emulateur sur ton pc avec une manette cela le fait aussi.

Modifié par Batman23, 18 mai 2020 - 11:57.

  • Retour en haut

Posté 18 mai 2020 - 12:22

#7
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

Installé RetroArch sur ma version, tu penses bien que ce que j'ai essayé en premier :)

Mais écran noir et gros plantage de la console, obligé de retirer la carte mémoire, et de relancer la console.

D'ailleurs sur le site de RetroArch c'est précisé : 
 

Note

You currently need the have custom firmware(PRO-C) to run RetroArch on your PlayStation Portable.

Warning

PRO-C must be running before running RetroArch, if you run RetroArch before running PRO-C, data corrupt error will occur.

Prerequisites

This is probably the most straightforward way to install RetroArch.

  • Pro CFW (latest version)

  • Retour en haut

Posté 18 mai 2020 - 13:08

#8
Batman23

Batman23

    Sunriseur PRIVILEGE

  • Members
  • PipPipPipPipPip
  • 3 911 messages
Ok donc il faut le 6.60proc

Sinon ces quoi ta psp ???

1000 ou 2000 ???

Modifié par Batman23, 18 mai 2020 - 13:16.

  • Retour en haut

Posté 18 mai 2020 - 13:49

#9
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

1000 


  • Retour en haut

Posté 18 mai 2020 - 14:11

#10
Cimmerian

Cimmerian

    Sunriseur elite

  • Members
  • PipPipPipPip
  • 1 384 messages
  • Sexe:Male

la maj tu doit la lancer comme un jeu, pas depuis le menu mise a jour


  • Retour en haut

Posté 18 mai 2020 - 14:42

#11
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

ca me fait une erreur "Impossible de lancer le jeu", comme l'a dit Batman23 : "Le 3.40 OE-A a effectivement une securité mise par Dark Alex a l'époque pour éviter une maj accidentelle."


  • Retour en haut

Posté 18 mai 2020 - 15:23

#12
Batman23

Batman23

    Sunriseur PRIVILEGE

  • Members
  • PipPipPipPipPip
  • 3 911 messages
J'ai trouver un recovery flasher 1.65


Note importante :

A) avoir une batterie a 100% et laisser sur secteur durant la procedure.

B)Enlever les theme modifier ou arriere plan personnaliser avant de commencer.

Ici: https://www.brewolog...id=12448&mcid=1

Il ya le firmware 6.20 pour psp 1000 (il faut sélectionner ''target firmware'' avec X)

Note: il n'y pas de numéro pour le 5.50gend3 et le 6.20officiel.


Ensuite il faut le firmware 6.60 pour psp 1000

Ici: https://wololo.net/d...hp/download/947


Ensuite 6.60proc disponibles sur le net il faut le trouver.

Modifié par Batman23, 18 mai 2020 - 15:28.

  • Retour en haut

Posté 18 mai 2020 - 15:52

#13
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

Merci, je vais essayer ce soir :)


  • Retour en haut

Posté 18 mai 2020 - 15:57

#14
Batman23

Batman23

    Sunriseur PRIVILEGE

  • Members
  • PipPipPipPipPip
  • 3 911 messages
En espérant que cela fonctionne.
  • Retour en haut

Posté 18 mai 2020 - 16:29

#15
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

J'ai également trouvé un "kit" d'upload d'un gars sur reddit pour passé de ma version à la dernière : https://www.reddit.c...uck_on_340_oea/


  • Retour en haut

Posté 18 mai 2020 - 18:59   Meilleure réponse

#16
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

Le contenu de son readme.txt pour info : 

 

-------------------------

 

Updating 3.40 OE-A to Most recent OFW/CFW. ``` 
 
MAKE SURE TO HAVE 80% BATTERY+ AND CHARGER PLUGGED IN FOR WHOLE PROCESS. ENSURE THERE IS 100mb+ AVAILABLE ON MEMORYSTICK. ```
 
 
1. Put 3.52M33-1 M33Creator folder (just the folder M33Creator with its contents) into the GAME150 (:/PSP/GAME150) folder on your PSP. It contains 1.50 and 3.52 updates to create your cfw file..Make the GAME150 folder if it is not there. . .
 
Exit usb mode, run M33 CREATOR on your PSP. Process takes 15mins to make your cfw file. Follow onscreen instructions. Once finished go back to XMB and there should be 3.52M33 UPDATE. Launch it and follow instructions. It will then update you to 3.52M33-1 CFW. 
 
 
2. Once updated, copy folder M33UPDATE4 from the 3.52M33-4 folder and place it into GAME150 folder on the PSP. Launch the updater. Follow onscreen instructions. Check system settings->system information to check you are now on 3.52M33-4. 
 
 
3. UPDATE FROM 3.52M33-4 to 3.71M33:
 
- Copy the UPDATE (3.71M33 folder) directory into /PSP/GAME/UPDATE and copy the EBOOT.PBP of the 3.71 Sony updater 
there but with name "371.PBP". Note: the program will not even show if you copy it to a different folder than that.
 
- If you are in the fat psp, make sure you have configured the psp to run the game folder in the 3.XX kernel. (THIS MEANS PRESSING SELECT ON THE XMB, OPEN RECOVERY MENU, AND MAKE SURE THE GAME FOLDER/KERNAL MODE IS 3.xx NOT 1.50)
 
- Execute the program, it requires 78% of battery. If you have idstorage corrupted due to a downgrader, the program
  will ask you to correct it automatically so the update can continue.
 
- Press X, and the Sony updater will begin. Sit and enjoy while Sony code installs 3.71 M33 :)
 
- When finished, the updater will ask you to reboot (pressing X or O). DO IT. Do not skip this step
shutting down the psp by yourself, or you'll end with a brick.
 
- You should be now in 3.71 M33
 
 
4. You should now be on 3.71M33 CFW. Go to the sony website for the latest official firmware. Install it through the XMB software update option. 

  • Retour en haut

Posté 18 mai 2020 - 21:59

#17
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

J'ai essayé ta solution Batman, mais j'ai le meme message "n'arrive pas à lancer le jeu",

Je pense que je vais essayer, le gros tuto, je vous tiens au jus.


Modifié par Cytrick, 18 mai 2020 - 22:16.

  • Retour en haut

Posté 18 mai 2020 - 23:19

#18
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

C'est bon, le tuto fonctionne, à la fin du Step 4 : j'ai enchaîné avec le tuto : https://hackinformer...1000_3XXOE.html pour passer en 6.61 PRO-C2

RetroArch lancé :) 

Y'a plus qu'à ^^'

(PS: je peux mettre le lien mega.com qui allaient avec le tuto ici, dites moi si ca pose un pb avec la charte du forum)


  • Retour en haut

Posté 19 mai 2020 - 07:30

#19
Cytrick

Cytrick

    Sunriseur

  • Members
  • PipPip
  • 19 messages

Oula par contre : je viens d'installer la 6.61 PRO-C2 (sur PSP Fat 1000) et pour ma part RetroArch fait tourner les jeux snes (core snes9x2005_plus_libretro.PBP avec jeu "Street Fighter II - The World Warrior.zip" dézippé) très leeeenteeeemeeeent :(

Par exemple j'avais un petit émulateur snes sur la version 3.40 OE-A qui faisait tourner Mario World 3 bien mieux (avec des plantages screens mais bien)


Modifié par Cytrick, 19 mai 2020 - 07:32.

  • Retour en haut

Posté 19 mai 2020 - 12:58

#20
Batman23

Batman23

    Sunriseur PRIVILEGE

  • Members
  • PipPipPipPipPip
  • 3 911 messages
Salut,

Essaye cette emulateurs snes pour ta psp : http://www.logic-sun...disponible.html


Prend les emulateur spécifiques a chaque console souhaiter sur internet exemple :
Picodrive : emulateur megadrive pour psp.

Note: pour la ps1 ces de base dans la psp et la psp s'arrete a la ps1 niveaux emulation donc pas de N64 et les autres console apres.

Modifié par Batman23, 19 mai 2020 - 16:07.

  • Retour en haut




1 utilisateur(s) li(sen)t ce sujet

0 invité(s) et 0 utilisateur(s) anonyme(s)


    Bing (1)