Non pas possible de changer là, j'ai pleins de serveur et je ne peux pas couper les services comme ça juste pour changer de plage d'ip
root@ps4host:/home/hoyohoyo# ifconfig
ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.1.1.4 netmask 255.0.0.0 broadcast 10.255.255.255
ether 00:0c:29:8f:37:32 txqueuelen 1000 (Ethernet)
RX packets 110 bytes 12895 (12.5 KiB)
RX errors 0 dropped 2 overruns 0 frame 0
TX packets 56 bytes 7635 (7.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Sinon ma config réseau
GNU nano 2.7.4 Fichier : /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug ens192
iface ens192 inet static
address 10.1.1.4
netmask 255.0.0.0
gateway 10.1.1.1
# This is an autoconfigured IPv6 interface
#iface ens192 inet6 auto
Pourtant sur mon pc windows ça fonctionne sur cette plage d'ip
Je prends la version GIT
j'ai ce message
root@ps4host:~/ps4-exploit-host# python start.py
Traceback (most recent call last):
File "start.py", line 26, in <module>
if sys.version_info.major < 3:
NameError: name 'sys' is not defined
Modifié par HoYoHoYo, 11 mars 2018 - 21:24.