Aller au contenu


Photo

dumb hex convert


  • Veuillez vous connecter pour répondre
3 réponses à ce sujet

Posté 19 février 2018 - 00:35

#1
djmm25

djmm25

    Sunriseur

  • Members
  • PipPip
  • 139 messages
  • Sexe:Male
  • Lieu:Algeria/setif
  • Passions:Goood OOld Gamers

hi my ps3 is broken but i have the hex dumb but when i try to write it with the e3 flasher it tell me probleme micro sd

can some one tell t convert to bin thanks


  • Retour en haut

Posté 19 février 2018 - 13:21

#2
littlebalup

littlebalup

    \0/ Boooorn to be wiiiiild ! \0/

  • Shining VIP
  • 3 197 messages
  • Sexe:Male
  • Lieu:Toulouse
You have to byte reverse/swap your dump.hex file (using pyPS3patcher or FlowRebuilder) then save the new file as bkpps3.bin on your sd card.

Modifié par littlebalup, 19 février 2018 - 13:21.

  • Retour en haut

Posté 19 février 2018 - 16:06

#3
djmm25

djmm25

    Sunriseur

  • Members
  • PipPip
  • 139 messages
  • Sexe:Male
  • Lieu:Algeria/setif
  • Passions:Goood OOld Gamers

You have to byte reverse/swap your dump.hex file (using pyPS3patcher or FlowRebuilder) then save the new file as bkpps3.bin on your sd card.

 

ok here my nand pls patch it for me 

http://www.mediafire...je2s3c/dump.hex


  • Retour en haut

Posté 19 février 2018 - 19:38

#4
littlebalup

littlebalup

    \0/ Boooorn to be wiiiiild ! \0/

  • Shining VIP
  • 3 197 messages
  • Sexe:Male
  • Lieu:Toulouse

ok here my nand pls patch it for me

 

I sent you by MP your dump swapped and patched, ready to write using your E3 flasher.
That dump is already patched to directly install a CFW. DO NOT USE PS3xploit after you written it or you'll brick again!

Note: you should remove the link of your dump from the forum or you'll lost your IDPS (if not already done...)
 


  • Retour en haut




1 utilisateur(s) li(sen)t ce sujet

0 invité(s) et 1 utilisateur(s) anonyme(s)