1- Copy over all files in the archive to the HDD or USB of the 360.
2 - Edit your launch.ini to have fakeanim = point to the fakeanim.xex
3 - Reboot the console and make sure the application runs. Ignore the Red Screen being present for a while.
4 - Once you have verified the application is launched remove bootanim.xex** from the consoles Flash. (Use FS3 or FTP).
5 - Reboot the console and pay attention to how long the red screen is displayed.
Calibration takes place in the fakeanim.ini file and should be checked with a cold boot in order to force the GPU to initialize.
Once calibration is complete edit the fakeanim.ini and set calibration to 0
Calibration Notes:
To adjust the length the red screen is shown. Add to the number to increase the time take delay. Take away to decrease it.
The delay function is used to ensure the video does not get cut off during the monitor and GPU starting each "delay" is 250ms. Valid entries are between 0 and 100.
For slims start around 5.
For Phats start around 13.
The goal is to get the red screen to show for the least amount of time possible on the Evil Laugh wmv when performing a cold boot.
http://www.youtube.com/watch?feature=player_embedded&v=EKmaI9m-dws
