Download SXT BFM Firmware Loader v1.00

WEBSITE : www.sonyxteam.com                              
IRC : #sonyxteam@tsz2.serveftp.com
Title :  BFM v1.00 beta (Boot From Memorystick)
Team :  SonyXteaM
Date :  01/12/2005
Type :  Firmware loader from memory stick
Coders :  Yoshihiro - SXT

Compatible 1.50
Does not run on 1.00 .

<--------------------------Release Note :---------------------------->

Yoshihiro and SXT are proud to bring you
The most advanced Firmware loader ever created for psp
It's been tested to boot successfully :
firmware 1.0 debug unit (the bogus 1.0 update from sony), 1.0 retail,
1.5 retail, 1.52 retail, 2.00 retail, 2.01 retail and 2.50 retail


This version is useful to devloppers and firmware hackers.

What's new :

- Loads 2.00 and higher firmwares (decrypted only)

- New module loading method uses drive realocations by unmounting flash0 and flash1 and moint it again to the MS drive

- more stable than the previous version.

- faster to load.

- no need to patch all of the fw modules.

- A lot more ram freed.

- can run eboots !

- The fw believes ms0 is flash0.

- Sources included !!!



What's known not to work:


- Most of 2.00 (and higher) functions inclueding web browser, location free works on 2.50
  This will be fixed in later releases

- there is a bug that screw the mp3 playback after playing a video.

- Some minor bugs to fix perhaps ?





<-------------------------  How To : -------------------------------->

Unrar the file and put the Folders into :
X:/PSP/GAMES/

Place the firmware files direcly in ms0:/ (on the root of your memory stick)
using the firmware original path, for instance loadcore.prx should be located
at ms0:/kd/loadcore.prx
(both flash0 and flash1 (do not care if flash0 and flash1 files share the same folders)
(dump the flash0 files or get them from an update by using fakeupdater or psardumper,
to get flash1 dump it, or get it over the internet)

Note: You can also use the 1.0 fw flash 1 directory to use with the
1.0 debug unit firmware and the 1.50 flash 1 directory to use with
the 1.51 and 1.52 firmwares.

To boot 2.00 (and higher) you will need flash1 from a 1.50 psp, using 2.00's flash1 wont work at this time.

To get Every firmware update eboot go to
http://www.psphacks....s/PSPFirmwares/
http://www.megauploa...m/?d=NCHYHPDF   to get the dumped 1.0
http://www.megauploa...m/?d=P43O6K7U   to get the dumped working 1.0 debug

Note: To run the debug unit 1.0 firmware you will need to replace
the following prx from the debug fw to the 1.0 retail fw:

threadmain.prx
sysreg.prx
modulemgr.prx

also take note that the 1.0 debug has a protection making it unable
to recognize eboots exept the one from the 1.0 debug update from sony.

Note: To extract firmwares you need to use an eboot unpacker, put the
psar from the update eboot in the root of your memory stick, and use
psardumper2.0A from pspet. Then you have two folders one called OUT
and one other called OUTX. OUTX is the descrypted fw while OUT is the
encrypted one. Then use readme.txt to create the correct folder path
for your fw.
You can also use fakeupdater that will create the directories for you.

press start to run the fw !          
  
Enjoy!!




Gr337z :

http://www.xboxrepairguide.com (The Best site for psp parts) ,
Pixel8 , PSP-DEV ,Nem ,Mike from http://www.Gamefreax.com, Edison Carter,
Gavroche , Nexis2600 ,djp from psp-spot.com,psp-generation.com, xmen, Mr_Dank, Canti (aka pyrosama),
Robocop from metagames-fr.com, psp-spot.com, maxconsole.net, psppet and Mame.