Download Firmware v0.3 pour Wiid

Firmware v03

This Firmware will:

1) Add Region Free capability to your Wii
2) Fix Super Mario Galaxy error #001
3) Improve media reading support

Instructions


Normal operation :
------------------

Just turn on your console as normal. Wiid operation is completely
transparent and will turn on only when a backup disc is inserted.


Firmware update :
-----------------

- Burn the firmware upgrade iso image to DVD-R/+R/-RW/+RW
- Turn on the Wii console without any disc inside and go
  to the Disc Channel.
- Insert the firmware upgrade disc.

The disc will spin for a few seconds while the firmware is
being upgraded and will finally stop.
A message on the screen will say "Unable to read the disc".
This is completely normal and signals that the firmware
update operation has been completed.


Firmware recovery :
-------------------

If for any reason you want to restore your Wiid to your
default factory configuration use the following procedure.
Note : wire D needs to be soldered for the recovery procedure
to be effective!

- Press and hold the RESET button on your wii.
- Turn on the Wii by pressing the power button either on the Wii
  console or on the Wii remote while keeping the RESET button pressed.
- Wait 15 seconds and release the RESET button.

All firmware upgrades including region settings are now removed
and your Wiid has been restored to the factory configuration.


Complete disable
----------------

Wiid automatically turns itself off when an original disc is inserted.
If for any reason you want to completely disable the chip use the
following procedure.
Note : wire D needs to be soldered for the disable procedure
to work!

- Press and hold the RESET button on your wii.
- Turn on the Wii by pressing the power button either on the Wii
  console or on the Wii remote while keeping the RESET button pressed.
- Wait 3 seconds and release the RESET button.

Wiid is now completely disabled.
Turn your Wii OFF and ON again to restore normal chip functionality.

 How to update ?

Instructions :
==============


Firmware update :
-----------------

- Burn the firmware upgrade iso image to DVD-R/+R/-RW/+RW
- Turn on the Wii console without any disc inside and go
  to the Disc Channel.
- Insert the firmware upgrade disc.

The disc will spin for a few seconds while the firmware is
being upgraded and will finally stop.
A message on the screen will say "Unable to read the disc".
This is completely normal and signals that the firmware
update operation has been completed.

Recommended program for burning the upgrade disc is Nero.



Firmware recovery :
-------------------

If for any reason you want to restore your Wiid to your
default factory configuration use the following procedure.
Note : wire D needs to be soldered for the recovery procedure
to be effective!

- Press and hold the RESET button on your wii.
- Turn on the Wii by pressing the power button either on the Wii
  console or on the Wii remote while keeping the RESET button pressed.
- Wait 15 seconds and release the RESET button.

All firmware upgrades including region settings are now removed
and your Wiid has been restored to the factory configuration.