Download SD-Boot v0.2 Bugfix 4

todo: fix gc-linux and apploaders which load a DOL from the FST.

v0.2 bugfix 4
- Large Speedup (I assumed 32mhz was being used but only 16mhz was!)
- Added in the 0.1 video setup again (choose autodetect)
- Changed back to seeks to sector 0 instead of drive status

v0.2 bugfix 3
- removed re-init of the SD card
- added sector size check
- added video mode selection
- removed IGR to gain speed
- removed readid patch, not needed
- changed seeks to sector 0 with drive status

v0.2 bugfix 2
- improved gcm selection (shouldnt hang) - TESTED NOW
- fixed ntsc users!

v0.2 bugfix
- removed game banner display (buggy)
- improved gcm selection (shouldnt hang)

v0.2
- Added IGR
- Improved speed slightly
- Fixed NTSC/PAL Issue
- SLOTA/B releases
- Display game banner

Notes about IGR:
Hold both L&R triggers and C-LEFT at the same time during a load time in
the game to go back to sd-boot.dol on your SD-Card. An easy way to do it
during a load would be to go back to the main menu of the disc whilst
holding down those buttons.
sd-boot.dol must be in the root directory of your card for IGR to work!

IGR may be removed in the future for speed gain but
now its not taking up much if any at all.

Notes about PAL on NTSC wii:
A ntsc wii cannot display PAL video signal. I suggest not trying to run
PAL programs on a ntsc wii as it wont work. (unless you hold B down
perhaps and are asked for PAL60 mode)..

Please note, although some things may have improved, some may have broken of course.