Download MPlayer CE v.0.71

ר•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨×
  ,.                                              
  :@@#                                            
  .,.      ...  ..         .@@&    .......    ,....  ,.    ......    ,,.....
  H@@@    S@@@r @@@@@@@@@A  @@3  :@@@@@@@@@2 #@@@@@ r@@9 A@@@@@@@@@  @@@@@@@
  9@@@@   @@@@: @@@M32X@@@  @@X  i@@A::;5@@@ ,@@@@M :@@5 @@@:::;@@@; @@@rsSi
  S@@@@i A@@@@, @@@    A@@  @@X    ,..iM@@@B :@@2   ,@@s A@@;;;   .  @@&    
  s@@@@@;@@@@@. @@@    &@@  @@X   #@@@@&2@@H S@@    .@@r ;@@@@@A     @@B    
  s@@:@@@@@,@@. @@@    H@@  @@3  ;@@2.;. @@H S@@:   .@@r @@@    :@@. @@@    
  5@@ ;@@@  @@. @@@,@@@@@@  @@@@ .@@@@@@ @@@ ;@@@@@@@@@r #@@@@@@@@@: @@@@  
  ,99  25i ,@@, @@@ @#A2r   :XB#  :S335. XGs   r9Ah2B@@s  rXAHHH&Xr  .2H@  
  @@@@@. @@@                              @@#@@@.                    
  @@#A;  A@H     -|    MPlayer CE •    |-  #@#B&:                •ßrK•

  http://code.google.com/p/mplayer-ce

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                           INTRODUCTION                        ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

MPlayer CE is an unofficial  port of the  very popular multimedia  player for
various  platforms  including  Windows  and  Linux.  This  Nintendo Wii  port
features the same compatibility that the other versions offer, but is limited
in some aspects  as it can't playback  some high resolution videos due to the
processing power of the Wii.

MPlayer CE will  allow you to  watch various  movies in different  formats on
your  Nintendo Wii  including AVI,  DIVX,  XVID,  MPEG2  and  DVD  Videos. It
actually supports a huge  range of formats  and can playback media from DVDs,
SD Cards, USB drives  and over your local  area  network  using  Samba  (SMB)
shares. MPlayer CE also  allows  you  to  listen  to  radio  streams over the
Internet.

This port is  based on the original work of  Team Twiizer's  MPlayer Wii port
and uses code from [rOn]'s  MPlayer Wii port along with code from GeeXbox. It
is currently  maintained by Scip, tipolosko, rodries, AgentX & DJDynamite123.

While there are  numerous ports and versions  of MPlayer for the Nintendo Wii
its hard to  tell which  one to use, but  this one is being heavily developed
and surpases  the other versions  due to its  performance, optimizations  and
features.

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                         SUPPORTED FORMATS                     ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

Supported Input Formats

  * (S)VCD (Super Video CD)
  * CDRwin's .bin image file
  * DVD, including encrypted DVD
  * MPEG-1/2 (ES/PS/PES/VOB)
  * RIFF AVI file format
  * ASF/WMV/WMA format
  * QT/MOV/MP4 format
  * RealAudio/RealVideo format
  * Ogg/OGM files
  * Matroska
  * NUT
  * NSV (Nullsoft Streaming Video)
  * VIVO format
  * FLI format
  * NuppelVideo format
  * yuv4mpeg format
  * FILM (.cpk) format
  * RoQ format
  * PVA format
  * streaming via HTTP/FTP, RTP/RTSP, MMS/MMST, MPST, SDP
  * TV grabbing

Supported Video and Audio Codecs

  * MPEG-1 (VCD) and MPEG-2 (SVCD/DVD/DVB) video
  * MPEG-4 ASP in all variants including DivX ;-), OpenDivX (DivX4), DivX 5 (Pro), Xvid
  * MPEG-4 AVC aka H.264
  * Windows Media Video 7/8 (WMV1/2)
  * Windows Media Video 9 (WMV3) (using x86 DLL)
  * RealVideo 1.0, 2.0 (G2)
  * RealVideo 3.0 (RP8), 4.0 (RP9) (using Real libraries)
  * Sorenson v1/v3 (SVQ1/SVQ3), Cinepak, RPZA and other QuickTime codecs
  * DV video
  * 3ivx
  * Intel Indeo3 (3.1, 3.2)
  * Intel Indeo 4.1 and 5.0 (using x86 DLL or XAnim codecs)
  * VIVO 1.0, 2.0, I263 and other H.263(+) variants (using x86 DLL)
  * MJPEG, AVID, VCR2, ASV2 and other hardware formats
  * FLI/FLC
  * HuffYUV
  * various old simple RLE-like formats

Most important audio codecs:

  * MPEG layer 1, 2, and 3 (MP3) audio
  * AC3/A52 (Dolby Digital) audio (software or SP/DIF)
  * AAC (MPEG-4 audio)
  * WMA (DivX Audio) v1, v2
  * WMA 9 (WMAv3), Voxware audio, ACELP.net etc (using x86 DLLs)
  * RealAudio: COOK, SIPRO, ATRAC3 (using Real libraries)
  * RealAudio: DNET and older codecs
  * QuickTime: Qclp, Q-Design QDMC/QDM2, MACE 3/6 (using QT libraries), ALAC
  * Ogg Vorbis audio
  * VIVO audio (g723, Vivo Siren) (using x86 DLL)
  * alaw/ulaw, (ms)gsm, pcm, *adpcm and other simple old audio formats

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                            INSTALLATION                       ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

To run MPlayer CE you'll need a Nintendo Wii that has been "soft modded" with
either  the  Homebrew  Channel,  Homebrew  Launcher  or LoadMii.  The archive  
contains a folder  named "MPlayer_ce"  which  you will  need  to copy to your
"apps" folder  on your SD Card.
Once  copied  over you  can launch it  using the  loader of your choice.

USB 2.0:
You need to  install the  USB 2.0 cIOS from here:
http://mplayer-ce.go...S_Installer.rar
(Please note that this requires a internet connection).
There is a offline instalation available, to read the guide, visit:
http://www.tehskeen....62838#post62838
The installer is for Homebrew USB2 only, this will install IOS202 using base
IOS60 and IOS36 automatically. You can select the IOS to use to do the
installation, so you can select a IOS with the fake sign bug. watch it download,
install incase it fails and returns to HBC, it should now install successfully.
(IOS60 and IOS36 are downloaded to SD via the Nintendo's Update Server).
We are using IOS60 as a base as there has been improvements in wifi.
Those that install this cIOS do not require a DVDx instalation.

Users without the fakesign bug cannot install the cIOS to use USB2:
There is a work around for this but requires you to downgrade a certain IOS,
to be able to place trucha into another.
Trucha Bug Restorer is an application in which to get IOS with the trucha bug back
on all Wiis (and new) with system menu up to 4.1. Usually the error codes -1017 and -2011
indicate that the trucha bug is required and missing.
Make sure you understand what you are doing before using this.
Only use it if you have an idea what the trucha bug (http://wiibrew.org/wiki/Signing_bug)
is and why you need it).
For more information regarding this, and the download, visit:
http://www.tehskeen....?articleid=4295

Once complete, Download the cIOS Installer for USB2 here:
http://mplayer-ce.go...S_Installer.rar and choose IOS36 as the IOS
in the selection screen, then Press A to install, watch it incase it fails and
returns to HBC, it should now install successfully.

If you plan on updating make sure to install the cIOS and DVDx before updating.

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                            CONFIGURATION                      ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

In the "MPlayer_ce" folder you copied over to your SD card you will find some
.conf files  which can  alter the way  MPlayer operates  and is also  used to
setup your SMB shares. MPlayer CE has  the ability to use  five different SMB
shares, but they  must be configured manually by editing the "smb.conf" file.
Inside of  it you'll find  five different  entries.  You can  fill in as many
shares as you like. The format is as follows:

#Samba share1  (smb1:/)
ip1=192.168.0.1
share1=Movies
user1=Test
pass1=fr0g

The "ip1" is your  computer's  IP address,  the "share1"  is the name of your
shared folder, "user1" is the  username you use to login to your computer and
lastly "pass1" is your password  you use to login to your computer. If you do
not use a username and password,  leave  user1  and  pass1  blank,  "user1=",
"pass1=" so MPlayer CE knows not to use a password to login to your SMB share.

If your share folder has a space in it, you must surround  it  with quotation
marks: share1="My Movies".

You can also force the aspect ratio of  the screen. This means that all video
files will be displayed at the specified ratio.  To force 16/9 you will  need
to edit the "mplayer.conf" file and add the following line:

"ratio=1.7778" (add it without the quotes)

Lastly, if you wish to change the  background image you can create  your own.
After creating a custom background  (it can be a still image or an animation)
convert it to a video, name it "loop.avi" and place it  in  the  "MPlayer_ce"
folder.  The specifications for "loop.avi" are listed below.

XVID MPEG4 Compressed AVI
640x456 or 720x480 Resolution

How to change colour of subtitles?

to change colour of subs you need to add some params to your'e mplayer.conf
e.g. with this param now subs are yellow
ass=yes
ass-font-scale=2.2
ass-color=FFFF0000
ass-font-scale to change subs size

More information can be found here:
http://www.mplayerhq...UBTITLE OPTIONS

Further Customization Instructions can be found on the MPlayer CE Wiki

http://code.google.c...layer-ce/w/list

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                               USAGE                           ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

After launching MPlayer CE a brief text based loading screen will appear then
the  Main Menu  will come up.  To  navigate  through  the  menus you use the
directional  pad  and the "A" button  for selecting  and the "B" button to go
back. The Main Menu presents you with the following options:

  Stop              - Stops the Current Movie/Song
  Open              - Open File/Playlist/Radio/DVD
  Current playlist  - View Current Playlist
  Options           - Options Menu
  About             - Credits
  Quit              - Return to Loader

-[ OPEN ]-

This option  will display  the following options  for you to choose  what you
want to play. Simply select your  source and pick a file to play with the "A"
button.

  File
  Playlist
  Subtitle
  DVD Video
  Radio

  -[ FILE / PLAYLIST / SUBTITILE ]-

These options will display the following sources for you to browse and select
which  files you wish to open. Simply select your  source and pick a  file to
play with the "A" button.

  Wii SD
  Wii USB
  Wii DVD
  SMB

-[ SMB ]-

This option will bring up the SMB  sharing menu where you can choose the  SMB
share you with to access:

  SMB share1
  SMB share2
  SMB share3
  SMB share4
  SMB share5

-[ DVD ]-

This option will bring up the DVD-Video  menu allowing you to play normal DVD
movies in your Nintendo Wii. It presents you with the following options:

  Play DVD              - Plays the DVD
  Chapter               - N/A (Does Nothing)
  Play Title #1         - Play 1st VOB
  Play Title #2         - Play 2nd VOB
  Play Title #3         - Play 3rd VOB
  Play Title #4         - Play 4th VOB
  Play Title #5         - Play 5th VOB
  Play DVD (libdvdnav)  - N/A (Reboots to Loader)

-[ RADIO ]-

This  option will display  a list of  the Radio  Streams you've  added to the
"menu.conf" file (see "Radio Streams" below).  You  can  pick which stream to
play from here.

-[ OPTIONS ]-

Using  the Options menu you can  configure various aspects  on how MPlayer CE
handles  playback of  your multimedia files. The options and descriptions are
listed below.

General
  OSD Level: 0-3
  Loop: 1-999

Audio
  Audio Stream
  Volume
  Balance
  Mute
  Delay

Video
  Frame Dropping: Enabled / Disabled
  
Subtitles
  Visibility: Enabled / Disabled
  Position: 100 through 0
  Delay: -3600 through 4700

Properties
  Displays the Properties of the current file you're playing

Aspect
  16:9
  4:3
  2.35:1

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                             CONTROLS                          ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

  Wiimote      GameCube Controller     Function                 Input.conf key
  ----------------------------------------------------------------------------
  A                 A               Pause                           a
  B                 B               Toggle Menu                     b
  1                 X               Close Menu / Show OSD           x
  RIGHT             RIGHT           Seek 10s forward                RIGHT
  LEFT              LEFT            Seek 10s backward               LEFT
  UP                UP              Seek 60s forward                UP
  DOWN              DOWN            Seek 60s backward               DOWN
  +                 R               Next Chapter                    r
  -                 L               Previous Chapter                l
  HOME              Z               Quit                            z
  2                 Y               Modifier Key

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                  DVD READING & DVD-VIDEO PLAYBACK             ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

The Nintendo Wii is capable of reading DVD DATA and DVD-VIDEO discs, but this
functionality  while  left  into  the  Nintendo  Wii  needs  to be enabled by
installing  DVDx from  Team Twiizers.  If you use USB2 and have installed the
cIOS202 then you don't need a DVDx install at all, as the cIOS has a patch to
access DVD without it.
You  can  locate  DVDx  from  the URLs below.  
Make sure to install  the  correct version as there is one for System Menu
3.2/3.3  3.4  and 4.0
DVDx 3.2/3.3 -> http://hackmii.com/2...-dvdx-installer
DVDx 3.4 -> http://hackmii.com/2009/02/dvdx34/
DVDx 4.0 -> http://bootmii.org/download/

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                           RADIO STREAMS                       ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

You can add your own radio  streams to MPlayer CE via editing the "menu.conf"
file.  Locate the included streams and copy  one and enter in the  new stream
information. As you can see below you need to specify a name and the location
of the PLS file. You can find thousands of PLS files here:

http://www.winamp.com/media/radio

Example:

<e name="Woxy radio" ok="loadlist 'http://woxy.lala.com/stream/aac32.pls'"/>

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                         Youtube/SHOUTcast                    · oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'
You can add changes to the Youtube/SHOUTcast, review your'e menu.conf as by
default it is running via Extrems Server.

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                             CHANGELOG                         ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

v0.71    
  * Improved memory management, due to MPlayer hanging if out of memory.
  Also new feature added if you press 1 twice it will show mem 1 and mem 2 info.
  * Driver improved with autodetection error, on error the device is reinitied  
  and read is retried, meaning it is very hard to hang the device.
  * EHCI Improvements have been made and now more usb devices are supported.
  * Now you don't need the fat partition to be primary or active, patch in libfat
  and now libfat searches in all partitions to find a fat partition.
  * If test.dol http://mplayer-ce.go...es/USB Test.rar say usb device is
  100% compatible and a device is not working in the last MPlayer revision. Then  
  there isn't a fat partition on the device, as a lot of people use ntfs instead.
  * Restore Points fixed, in previous release when you quit restore point was not saved,  
  now quit or power off saves restore point and can resume properly.
  Delete your'e previous restore point incase it is corrupted, and check SD isn't locked.
  * Improved smb connections, will always reconnect. (so you can remove shares from pc,  
  and re-enable them, MPlayer will reconnect, so it's a easier way to test smb if you  
  have problems setting it up).  
  * Improved stream initilization.
  * Fixed green lines at the top of screen whilst loading MPlayerCE.
  * Video files (which may be badly encoded) that may have unexpectedly froze at some
  point during playback in previous releases may playback without a possible glitch
  (such as that freeze/hang).
  * Change in MPlayer but it's only for testing usb2, now you can load a external  
  driver from sd. If you copy the driver to sd that driver will be used instead
  of the internal driver, more details (drivers) will be added to google code at a  
  later date, thanx to hermes's patch.
  * Finnally found/fixed the problem with network and usb2 conflicts, because the driver
  was using a bad device the name /dev/usb2 is good, but /dev/usb/ehc is bad  
  Because it is used by the network driver http://wiibrew.org/wiki//dev/usb/ehc
  http://wiibrew.org/wiki//dev/usb/oh0 In previous releases there was a possible conflict.
  * Autoload implemented, so if the next file has a very similar name it will autoload it.
  Using a levenshtein distance of 2. So if you need to change only 1 or 2 letter/numbers  
  then it is similar.
  Examples: film.part1.avi > film.part2.avi only 1 change is needed to get the same name.
  Also house.s01e09.avi > house.s01e10.avi works, (2 changes).
  * Removed the need to load fonts twice when you load a video file as the fonts have to be
  loaded to adjust to the film size, 2 fonts are always loaded. 1 for menu and 1 for subs.  
  Now font for subs are loaded only if it's needed, and the font face is cached, so fonts  
  are loaded faster, making the video file load quicker.
  * Improved error reading streams/files (example if you remove share from your pc then  
  MPlayer stops film when cache has finished, now while MPlayer has cache it will try to  
  read again, so if you enable share again then MPlayer will continue playing without any  
  problems, only stops video file if can't read, or cache is empty. Now MPlayer is more  
  robust on errors). If you unplug & plug usb MPlayer will stop film because usb is off  
  and you need to remount. But if you get an error reading from usb or sd etc MPlayer  
  will try to read again. (For example when a hd usb's motor stops due to inactivity on  
  pause then when you press start again MPlayer will use cache and can recieve an error  
  because motor is not ready).
  * Many other small fixes and code cleanup.

v0.7
  * Files now first analyse, followed by cache, as cache was emptied on
  analysing previously so now you'll see cache filling later.
  * Improved audio/video internet cache, detects if it is a internet stream,
  if it's a radio stream then initial cache fill is small.
  * Optimizing memory access suggestion from Shagkur, cache thread is now more stable.
  * A8 patch added for DVD playback in cIOS202 to avoid problems with old ModChips.
  * Improved libfat and fix for special characters.
  * Using latest Libfat to prevent possible corruption on sd.
  * Improved USB hotplug and dvd detection, echi module modified for more
  compatability with usb devices.
  * Can now mount any fat partition, shouldn't matter if partition is set
  as primary or activated.
  * Now has real fat32 limit therfore can now play larger files.
  * Video files that hadn't worked previously may work now.
  * New buffering system implemented for when buffering is low, if cache becomes low,
  it will pause and re-buffer to fill cache-min value, to prevent possible hangs
  with bad connections. You can see the cache by pressing 1 twice on the wiimote,
  when cache drops to 3% then it will pause.
  * Shoutcast TV is complete with caching, thanx to Extrems, Review menu.conf.
  * If IOS202 is installed via the Installer then DVDx is not required for DVD Access.

New cIOS Installer:

  MPlayerCE will now detect the presence of IOS202 to decide to use DVDx or not,
  so people that install the cIOS202 don't need to install DVDx to use the DVD functions.
  Default DVDx install can be used if you install IOS202 now.
  The new installer is for Homebrew USB2 only, this will install IOS202
  using base IOS60 automatically as IOS60 has improvements in wifi.
  Now you can select the IOS to use to do the installation,
  so you can select a IOS with the fake sign bug.
  (The reason for DVDx not having to be installed if IOS202 is installed on the wii,
  is that there is a patch in IOS202 that doesn't require DVDx,
  and can access DVD without it).
  The cIOS is needed for MPlayerCE to use the USB2 driver.

v0.62
  * USB LAN Adaptor support fixed (again).  Thanks to CountZ3ro for testing.
  Please note that you will need to install the USB 2.0 cIOS.
  * cIOS improved to stop conflicts with other homebrew. Please note that
  now only port0 has usb2 support. All other USB devices (including the
  USB LAN adaptor) must go in port1.  See here for details:
  http://mplayer-ce.googlecode.com/files/usb.jpg
  * Horizontal stretch parameter added (see mplayer.conf)
  * YouTube options added to menu.conf (thanks to Extrems)
  * Many small bug fixes

v0.61
  * New screen size variables actually work now.
  * Better usb device detection
  * Using free Liberation font instead of Arial
  * Subtitle wraparound bug fixed

v0.6
  * No more maximum cache limit
  * Introduced new variables into mplayer.conf to adjust screen size and
  position, please see mplayer.conf for details (component-fix is now
  deprecated)
  * idx/sub subtitle support (please note that these can take up to 30
  seconds to load so please be patient)
  * Multiple folder locations added, it is now possible to have the files in
  - sd:/apps/mplayer_ce
  - sd:/mplayer
  - usb:/apps/mplayer_ce
  - usb:/mplayer
  * Added resume points - video will resume at last stopped point.
  To clear, delete resume_points file in your mplayer_ce folder.
  To seek to the beginning of the video hold 2 and press the minus button.
  * Added support for Hermes' cIOS.  This has greater USB compatibility
  and enables USB LAN connector support.  Please see wiki page for details
  * Added Fribidi library support for right-to-left languages
  * Made cache fill visible on screen
  * Many small bug fixes
  * Updated to latest MPlayer svn

v0.5
  * SMB now much more robust - thanks to DennisLKJ for smb.c fix
  * libfat cache improved for speed and stability
  * USB ethernet now fixed with USB 1.1; USB 2.0 fix requires an
  updated cIOS
  * Added ability to manipulate picture using the nunchuck
  * Updated to latest MPlayer revision
  * Now using subfont.ttf instead of font folder - use mplayer.conf
  to change font size
  * Merged widescreen and 4:3 pack - now MPlayer will use the appropriate
  loop.avi automatically
  * Improved modchip compatibility for DVD

  v0.4

  * USB 2.0 support
  * TTF font support
  * Fixed bug in radio streaming.
  * DVD-Video bugs fixed (DVDs should play much more smoothly now)
  * Fixes in Libdi to detect chipped Wii
  * Codec fixes
  * Updated to latest MPlayer revision
  * Many small fixes

  v0.3
  
  * Fixed code to play videos with incompatible size
  * We now support many video formats and unorthodox resolutions
  * Fixed keepalive issue in samba (thanks to Ludovic Orban)
  * New loop.avi and widescreen version (thanks to Blue_K)
  
  v0.21e
  
  * Fixed apostrophies in filenames
  * Improved DVD and USB mounting devices
  * Fixed radio
  * Improved samba reconnection
  * Debugging help for SMB Shares at bootup. It will pause for 10 seconds.
  #debug_network=yes Review mplayer.conf

  v0.21d

  * Updated menu.conf to allow selecting playlist
  * Fix rodries' loop patch

  v0.21c

  * Updated menu.conf to allow selecting subtitles

  V0.21b

  * New mplayer.conf option: component_fix=yes to fix side bars on some
  problematic TVs (Now fixed) Review your configs.
  * Stop Looping Video/Audio file.
  * Fixed hang when you access dvdnav

  V0.21

  * Reduced font size
  * New Readme
  * New mplayer.conf option: component_fix=yes to fix side bars on some
  problematic TVs

  V0.2

  * SD/USB Mount bugs fixed
  * DVD Mount/Stop/Motor/Pause problems fixed, now mounts, only when you
  select DVD
  * Network Initialising on startup changed, now connects "hidden" in
  background.
  * Added 5 SMB Shares, review smb.conf
  * Boot-up speed increased
  * Added files filter to only show audio/video files
  * Same directory kept open when you open/close the menu
  * Menu closes on file load

V0.1

  * SMB fixes
  * DVD cache bug fixed
  * Small USB fixes
  * Modified Libogc & Libfat
  * 2.35:1 videos now scale correctly

V0.1 Christmas Edition

  * Initial project

×—–­—–­—–­—–­ –­—–­—–­—–­—–­—–­—–­—–­—–­—–­— ­—–­—–­—–­—–­—–­—–­—–­—-­—–­-–•¬
|0O×øo·                              CREDITS                          ·oø×O0|
`¨•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨'

  Scip - Original Project Author
  tipolosko - DVD-DATA Feature Author
  rodries - Coding, SMB & USB Improvements
  AgentX - Source Improvements, Configs & Testing
  DJDynamite123 - Autochain Code/Experimenting & Testing
  Ludovic Orban - Keepalive issue in samba
  Extrems - SHOUTcast/Youtube Patches
  Tantric - SMB Improvements
  hax - FTP devoptab
  Brakken - Documentation
  Blue_K - loop.avi
  
  Thanks Goes Out To ...
  
  [rOn]
  Team Twiizers
  GeeXboX Authors
  dargllun
  Daca
  Shagkur & LibOGC Contributers
  
ר•¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨¨¨¨•ßrK•